[Detection gas]:propane (liquefied gas)
[Type]:Figaro TGS2618
[Response time]:≤10 s
[Recovery time]:≤10 s
[Size]:32×25×15mm
[Features]:safe and reliable, small size, easy to install
[Introduction]:This module is widely used in the whole machine development of household gas leakage alarm and gas leakage detection components. The input power supply, induction probe and signal output in the sensor are completely isolated. Safe and reliable, small size, easy to install. This product adopts high-sensitivity semiconductor probe with stable signal and high precision. It has the characteristics of wide measurement range, fast response speed, convenient use and easy installation.
Number | Pin Orientation | Remark |
1 | VCC | 5V module power input |
2 | GND | reference place |
3 | CTL1 | Control output 1: 1. Continuously low level when there is no alarm or fault. 2. In the alarm state, the continuous high level. |
4 | RXD | Serial port RXD data receiving pin |
5 | TXD | Serial port TXD data transmission pin |
6 | CTL2 | Control output 2: 1. Continuously low level when there is no alarm or fault. 2. In the alarm state, the continuous high level. |
7 | CTL3 | Control output 3, buzzer control: high level beep |
8 | CTL4 | Control output 4, fault light control: high level on, low level off |
9 | VDD | Module 3.3V output, output current <100mA |
10 | IO1 | Alarm light control port: high level on, low level off |
11 | IO2 | Power light control port: high level on, low level off |
12 | IO3 | Self-test key input port: low level key is valid |
13 | IO4 | reserve |
14 | IO5 | reserve |
15 | IO6 | NC (keep floating) |