Home >Modem>Remote IO module>RS485/RS232 IO
MA02-AACX2240-0 (1)
MA02-AACX2240-0 (1)
【2DI+2AI+4DO】MA02-AACX2240

[power]:DC 8~28V

[Specifications]:2DI+2AI+4DO

[Digital input]:2

[Analog input]:2

[Digital output]:4

[Interface mode]:RS232

[Installation method]:positioning hole

[Size]:115*90*40mm

[Introduction]:MA02-AACX2240 supports the acquisition of 2-channel sensor switch input (DI) and 2-channel sensor analog input (AI), which is converted into serial port (RS232) and data is transmitted to configuration software or PLC. Theserial port I/O networking module (also called "remote IO") that realizes the remote acquisition and control function by issuing commands through the serial port to control 4 relay switch outputs (DO).

1
Serial number Pin Pin direction remarks
1 + Power supply . . It is recommended that RVV 2 x 0.75 wire
2 Ground - It is recommended that RVV 2 x 0.75 wire
3 B/RX RS485 corresponds to B It is recommended that RVSP 3 x 0.5 wire
4 A/TX RS485 corresponds to A It is recommended that RVSP 3 x 0.5 wire
5 GND The signal is grounded It is recommended that RVSP 3 x 0.5 wire
6 WITH Enter the common end of the channel It is recommended that RVV 2 x 0.5 wire
7 DI1 Switch input channel 1 It is recommended that RVV 2 x 0.5 wire
8 DI2 Switch input channel 2 It is recommended that RVV 2 x 0.5 wire
9 AI1 Analog input channel 1 It is recommended that RVV 2 x 0.5 wire
10 AI2 Simulate input channel 2 It is recommended that RVV 2 x 0.5 wire
11 DO1 Switch output channel 1 Relays have normal open and normal closed ends
12 DO2 Switch output channel 2 Relays have normal open and normal closed ends
13 DO3 Switch output channel 3 Relays have normal open and normal closed ends
14 DO4 Switch output channel 4 Relays have normal open and normal closed ends