[Specifications]:4AI+2DO
[Interface mode]:RS485
[Installation method]:positioning hole
[Size]:80*50*30mm
[Product weight]:80±5g
[Introduction]:The MA01-XACX0420 is a support for the acquisition of four sensor analog inputs (AI), converted to serial port(RS485) data transfer to configuration software or PLC. The serial I/O networking module (also known as "Remote IO") for remote acquisition control function is realized by controlling the 2 relay switch output (DO) by sending instructions from the serial port.
Serial number | Pin | Pin direction | remarks |
---|---|---|---|
1 | DO2 | Switch output channel 2 | Relays have normal open and normal closed ends |
2 | DO1 | Switch output channel 1 | Relays have normal open and normal closed ends |
3 | AI2 | Simulate input channel 2 | It is recommended that RVV 2 x 0.5 wire |
4 | AI1 | Analog input channel 1 | It is recommended that RVV 2 x 0.5 wire |
5 | B/RX | RS485 corresponds to B | It is recommended that RVSP 3 x 0.5 wire |
6 | A/TX | RS485 corresponds to A | It is recommended that RVSP 3 x 0.5 wire |
7 | GND | Ground - | It is recommended that RVV 2 x 0.75 wire |
8 | VCC | Power supply . . | It is recommended that RVV 2 x 0.75 wire |
9 | AI4 | Analog input channel 4 | It is recommended that RVV 2 x 0.5 wire |
10 | AI3 | Analog input channel 3 | It is recommended that RVV 2 x 0.5 wire |