MA01-AXCX1010-V2P 1DI+1DO Serial port I/O Networking module support standard ModBus-RTU communication protocol RS485 support configuration/PLC/host computer Hongfa relay
[Specifications]：1DI + 1DO
[Communication interface]：RS485
[Working voltage]： DC 8~28V
[Installation method]：Guide rail + positioning hole
[Product size]：54*90*32mm
[Product weight]：75±5g
[Introduction]：MA01-AXCX1010-V2P is a serial I/O networking module (also known as "Remote IO") that supports the acquisition of 1-way sensor switch input (DI), conversion to serial data for transmission to configuration software or PLC,and the sending of commands through the serial port for control of 1-way relay switch output (DO) to realize remote acquisition and control functions. The product is sprayed with three anti-paints, which has the functions of "anti-mold", "anti-moisture" and "anti-salt spray".
Magasin officiel
| No | Pin | Description | Remarks |
| 1 | DC8-28V “-〃 | Power ground “-〃 | RVV 2*0.75 wire is recommended |
| 2 | DC8-28V "+" | Power supply "+" | |
| 3 | B | RS485 corresponds to B | Reset button, long press and short press have different functions |
| 4 | A | RS485 corresponds to A | |
| 5 | RESET button | Short press (50ms-1.5S) to restart, long press the button for 5s-10s to restore to factory settings, more than 10s invalid | |
| 6 | COM | Switch input channel COM terminal | RVV 2*0.75 wire is recommended |
| 7 | Dl1 | Switch input channel 1 | |
| 8 | DO1 | Switch input channel 2 |