MA01-AXCX1010-V2P 1DI+1DO Serial port I/O Networking module support standard ModBus-RTU communication protocol RS485 support configuration/PLC/host computer Hongfa relay
[Specifications]：1DI + 1DO
[Communication interface]：RS485
[Working voltage]： DC 8~28V
[Installation method]：Guide rail + positioning hole
[Product size]：54*90*32mm
[Product weight]：75±5g
[Introduction]：MA01-AXCX1010-V2P is a serial I/O networking module (also known as "Remote IO") that supports the acquisition of 1-way sensor switch input (DI), conversion to serial data for transmission to configuration software or PLC,and the sending of commands through the serial port for control of 1-way relay switch output (DO) to realize remote acquisition and control functions. The product is sprayed with three anti-paints, which has the functions of "anti-mold", "anti-moisture" and "anti-salt spray".
Magasin officiel| category | name | parameter |
| power supply | Operating voltage | DC 8～28V |
| Operating current | 50mA @12V | |
| Power indicator | Green LED indicator | |
| serial port | Communication interface | RS485 |
| baud rate | 1200bps～115200 bps (default 9600 bps) | |
| Data bits | 8 (fixed) | |
| Check bit | No parity, odd parity, even parity (default is no parity) | |
| Stop bit | 1 (fixed) | |
| Communication Protocol | Modbus RTU protocol | |
| Device address | 0~255 (default address 1, 0 is the broadcast address) | |
| indicator lights | The red LED remains lit after power-on; during communication, it flashes with a 60ms cycle. | |
| DI Input | DI channels | Routes 1/2/3/4 |
| Interface type | wet nodes | |
| Triggering method | Rising edge, falling edge, level (default rising edge trigger) | |
| Filter parameters | 1 to 16 (default 6) | |
| sampling frequency | 1 kHz | |
| DO output | DO path | Routes 1/2/3/4 |
| DO output type | Type C relay (normally open + normally closed) | |
| DO output mode | Level mode, pulse mode, follow mode, loop mode | |
| Relay contact capacity | 30V/10A、250V/10A | |
| Output Indicator | Red LED indicator | |
| other | Product Dimensions | MA01-AXCX1010-V2(P) 54*90*32(mm) |
| MA01-AXCX2020-V2(P) 90*90*40(mm) | ||
| MA01-AXCX3030-V2(P) 90*90*40(mm) | ||
| MA01-AXCX4040-V2(P) 115*90*40(mm) | ||
| Product weight | MA01-AXCX1010-V2 74±5g | |
| MA01-AXCX1010-V2P 75±5g | ||
| MA01-AXCX2020-V2 121±5g | ||
| MA01-AXCX2020-V2P 123±5g | ||
| MA01-AXCX3030-V2 133±5g | ||
| MA01-AXCX3030-V2P 134±5g | ||
| MA01-AXCX4040-V2 164±5g | ||
| MA01-AXCX4040-V2P 165±5g | ||
| Operating temperature and humidity | -40 to +85℃, 5% to 95%RH (non-condensing) | |
| Storage temperature and humidity | -60 to +125°C, 5% to 95%RH (non-condensing) | |
| Installation method | Guide rail and positioning hole installation |