[Chip Solution]：ESP8285+SX1281
[Operating Frequency]：2.4GHz
[Transmit Power]：20dBm
[Communication Interface]：UART
[Size]：12*18mm
[Product Weight]：1.0g ±0.1g
[Introduction]：The EWM700-2G4T20DXN is a new generation wireless receiver module developed based on the ExpressLRS open-source project. It features long communication distance, low latency, high refresh rate, strong anti-interference capability, and flexible configuration. The EWM700 series uses the ESP8285+SX1281 chip solution, operates in the 2.4GHz band, supports TTL level input and output, and has a maximum output power of 100mW. It is suitable for applications such as UAVs, remote control, flight control, surveying, and model aircraft.
Official Store| Parameters | Description |
| Product models | EWM700-2G4T20DXN |
| Connection protocol | CRSF |
| Operating frequency | ISM 2.4GHz |
| Chip solutions | ESP8285+SX1281 |
| Interface method | 2.54mm hole layout |
| Communication interface | UART |
| Return power | 100mW |
| Antenna interface | IPEX1 |
| Weight | 1.0g±0.1g |
| External dimensions | 18.0*12.0*3.5mm (length * width * thickness). |
| Default firmware | ExpressLRS 3.4.2 Generic ESP8285 PA 2.4Ghz RX |
| Work environment | |
| Operating temperature | -40°C~+85°C, industrial-grade standard |
| Operating humidity | 10～90%RH |
| Storage temperature | -40℃～+125℃ |
| Electrical parameters | |
| Supply voltage | 3.3V~5.5V, 5.0V power supply is recommended; exceeding 5.5V carries the risk of module burnout |
| Communication level | TTL |
| Transmit the current | ≈165mA,WiFi off, instantaneous power consumption |
| Receiving current | ≈ 37mA, WiFi off |
Note:
(1) The firmware version of the remote control/high-frequency head/transmitter must match the receiver, i.e., version 3.0; otherwise, frequency matching will not be possible
(2) ELRS receivers do not have a pairing password at the factory