Home >Module>LoRa>SX1268
EWM22A-400R30D 10km LoRa Wireless Module Industrial standard design Support trunk networking New generation LoRa spread spectrum technology .

[Communication interface]:RS485

[Frequency]:410.125~493.125MHz

[Transmitting power]:30dBm

[Communication distance]:10km

[Size]: 26*48mm

[Product weight]:8.9±0.1g

[Introduction]:EWM22A-400R30D is a new generation of LoRa wireless data transmission module. This series of wireless modules is an RS485 interface module developed based on SEMTECH high-performance RF chips. It has multiple transmission modes, works in the (410.125~493.125MHz) frequency band (default 433.125MHz), supports DC5V power supply, and can be used with the E22-T series of the same frequency band for low-power applications. The LoRa module uses a new generation of LoRa spread spectrum technology, which is faster, has lower power consumption, and is smaller in size; it supports air wake-up, wireless configuration, carrier monitoring, automatic relay, communication key and other functions, supports sub-packet length setting, and can provide customized development services.

PIN
Pin number Pin Name Pin Direction Pin Purpose
1 VCC input Module power positive reference, voltage range: 4.5~5.5V DC
2 GND - Module ground wire
3 485A Input/Output RS485 interface A, external RS485 device A
4 485B Input/Output B of RS485 interface, B of external RS485 device
5 Etc. Output Essentially AUX, it indicates the module is busy. For details, please refer to Section 5.3 STB Details
6 Send indicator light - Green, the indicator light flashes when data is sent
7 Receiving indicator - Blue, the indicator light flashes when receiving data
8 Fixing holes - Fixing hole (diameter 2.75mm)
9 RF Interface - SMA-K, equivalent impedance is about 50Ω
10 Fixing holes - Fixing hole (diameter 2.75mm)
11 Fixing holes - Fixing hole (diameter 2.75mm)