Home >Module>Zigbee>Other
EWM181-Z12SX(E) End Device ZigBee 3.0 Wireless Module Network Self-healing Equipped with onboard PCB antenna Simple and easy to develop

[Communication Interface]:UART

[Operating Frequency]:2.4GHz

[Transmit Power]:12dBm

[Communication Distance]:0.6km

[Size]:14*20mm

[Product weight]:1.3±0.1g

[Introduction]:The EWM181-Z12SX series is a small-sized 2.4GHz frequency band ZigBee 3.0 to serial port wireless module designed and produced by Ebyte. It is a SMD type, with a maximum transmit power of 12dBm, a pin pitch of 1.27mm, and comes with self-organizing network firmware. It is simple and easy to use. The ZigBee 3.0 wireless module is mainly suitable for data transmission application scenarios.

Main parameters performance Remark
Minimum Maximum
Power supply voltage (V) 0 3.6 Over 3.6V will permanently burn the module
Blocking power (dBm) - 10 The probability of burning is lower when used at close range
Operating temperature (°C) -40 85 Industrial grade
Main parameters performance Remark
Minimum Typical values Maximum
Operating voltage (V) 2 3.3 3.6 ≥3.3V can guarantee output power
Communication level (V)
3.3
Using 5V TTL has the risk of burning
Operating temperature (°C) -40 - 85 Industrial-grade design
Operating frequency band (GHz) 2.4 - 2.48 Support ISM band
Power consumption Emission current (mA)
28
Instantaneous power consumption
Receive current (mA)
10

Sleep current (μA)
2
Long-term dormancy
Maximum transmit power (dBm) -3 12 12
Main parameters describe Remark
EWM181-Z12SP communication distance 300m Clear and open air, onboard PCB antenna, 2 meters height, air data rate 250kbps
EWM181-Z12SX communication distance 600m Clear and open air, antenna gain 3.0dBi, height 2 meters, air data rate 250kbps
protocol ZigBee
Communication interface UART TTL level
Packaging SMD
Data packet length Transparent transmission 150 Bytes
Fixed-point broadcast/multicast 75 Bytes
Fixed-point unicast 128 Bytes
Interface stamp holes 1.27mm pitch
Dimensions 14*20mm ±0.2mm
EWM181-Z12SP antenna interface PCB Equivalent impedance is about 50Ω
EWM181-Z12SX antenna interface IPEX Equivalent impedance is about 50Ω
EWM181-Z12SP Product Weight 1.0g ±0.1g
EWM181-Z12SX Product Weight 1.3g ±0.1g