[Communication Interface]:UART
[Operating Frequency]:2.4GHz
[Transmit Power]:12dBm
[Communication Distance]:0.6km
[Size]:14*20mm
[Product weight]:1.3±0.1g
[Introduction]:The EWM181-Z12SX series is a small-sized 2.4GHz frequency band ZigBee 3.0 to serial port wireless module designed and produced by Ebyte. It is a SMD type, with a maximum transmit power of 12dBm, a pin pitch of 1.27mm, and comes with self-organizing network firmware. It is simple and easy to use. The ZigBee 3.0 wireless module is mainly suitable for data transmission application scenarios.
| Pin number | Pin Name | Pin direction | Pin Purpose |
| 1 | GND | Input/Output | Ground wire, connected to the power reference ground |
| 2 | WKP | input | Module sleep wake-up pin, low level wake-up, default pull-up |
| 3 | NWK_KEY | input | One-key networking pin, 10ms~1000ms low level to configure the network, 5s low level to reset the network, default pull-up |
| 4 | PD4 | Input/Output | Reserved, users do not need to pay attention |
| 5 | PA7 | Input/Output | Reserved, users do not need to pay attention |
| 6 | PD2 | Input/Output | Reserved, users do not need to pay attention |
| 7 | PD7 | Input/Output | Reserved, users do not need to pay attention |
| 8 | PB7 | Input/Output | Reserved, users do not need to pay attention |
| 9 | PB6 | Input/Output | Reserved, users do not need to pay attention |
| 10 | GND | Input/Output | Ground wire, connected to the power reference ground |
| 11 | VCC | input | Power supply, 2.0 ~ 3.6V DC power supply |
| 12 | TXD | Output | Serial port data output |
| 13 | RXD | input | Serial port data input |
| 14 | PC1 | Input/Output | Reserved, users do not need to pay attention |
| 15 | PC4 | Input/Output | Reserved, users do not need to pay attention |
| 16 | LINK | Output | Network status indicator, high level network is valid, default low level |
| 17 | PC0 | Input/Output | Reserved, users do not need to pay attention |
| 18 | RST | input | Reset pin |