Home >Module>Zigbee>Other
EWM181-Z12SP(R) Router ZigBee 3.0 Wireless Module Network Self-healing Equipped with onboard PCB antenna Simple and easy to develop

[Communication Interface]:UART

[Operating Frequency]:2.4GHz

[Transmit Power]:4.5dBm

[Communication Distance]:0.3km

[Size]:14 x 20mm

[Product weight]:1.0 ± 0.1g

[Introduction]:The EWM181-Z12SP series is a compact, 2.4GHz ZigBee 3.0-to-serial wireless module designed and manufactured by Ebyte. This SMD-type module features a maximum transmit power of 12dBm and a 1.27mm pin pitch. It comes with pre-installed ad hoc networking firmware for ease of use. This ZigBee 3.0 wireless module is primarily suitable for data transmission applications.

PIN
Pin number Pin Name Pin direction Pin Purpose
1 GND Input/Output Ground wire, connected to the power reference ground
2 WKP input Module sleep wake-up pin, low level wake-up, default pull-up
3 NWK_KEY input One-key networking pin, 10ms~1000ms low level to configure the network, 5s low level to reset the network, default pull-up
4 PD4 Input/Output Reserved, users do not need to pay attention
5 PA7 Input/Output Reserved, users do not need to pay attention
6 PD2 Input/Output Reserved, users do not need to pay attention
7 PD7 Input/Output Reserved, users do not need to pay attention
8 PB7 Input/Output Reserved, users do not need to pay attention
9 PB6 Input/Output Reserved, users do not need to pay attention
10 GND Input/Output Ground wire, connected to the power reference ground
11 VCC input Power supply, 2.0  ~  3.6V DC power supply
12 TXD Output Serial port data output
13 RXD input Serial port data input
14 PC1 Input/Output Reserved, users do not need to pay attention
15 PC4 Input/Output Reserved, users do not need to pay attention
16 LINK Output Network status indicator, high level network is valid, default low level
17 PC0 Input/Output Reserved, users do not need to pay attention
18 RST input Reset pin