Home >Module>Zigbee>Other
EWM181-Z04SX ZigBee3.0 to serial port wireless module small size 2.4GHz frequency band

[Communication interface]:UART

[Operating frequency]:2.4GHz

[Transmitting power]:4.5dBm

[Communication distance]:240m

[Packaging method]: SMD

[Product size]:14*20mmm

[Product weight]:1.1±0.1g

[Introduction]:EWM181-Z04SX is a small-sized, 2.4GHz frequency band, IPEX antenna interface ZigBee3.0 to serial port wireless module designed and produced by Ebyte. It is a SMD package with a maximum transmit power of 4.5dBm and a pin spacing of 1.27mm. It comes with self-organizing network firmware and is easy to use. It is mainly suitable for data transmission application scenarios.

Main parameters performance Remark
minimum value Typical value maximum value
Working voltage (V) 2 3.3 3.6 ≥3.3V guarantees output power
Communication level (V)
3.3
Using 5V TTL risks burning out
Working temperature (℃) -40 - 85 Industrial grade design
Working frequency band (GHz) 2.4 - 2.48 Support ISM band
Power consumption Emission current (mA)
35
Instantaneous power consumption
Receive current (mA)
27

Sleep current (μA)
0.8
long dormancy
Maximum transmit power (dBm) 3.5 4 4.5
Receiving sensitivity (dBm) -98 -99 -100 Over-the-air speed is 250kbps
Main parameters describe Remark
Communication distance 240mSunny and open, antenna gain 3.0Bi, height 2 meters, air rate 250kbps
protocol ZigBee
Communication interface UART
Packaging method SMD type TTL level
pass-through Packet length 150Bytes
Fixed-point broadcast/multicast 75Bytes
fixed-point unicast 128Bytes
Interface mode 1. 27mm
Overall dimensions 14*20mm
Antenna interface IPEX Equivalent impedance is about 50Ω
Main parameters performance Remark
minimum value maximum value
Supply voltage (V) 0 3.6 Exceeding 3.6V will permanently burn the module
Blocking power (dBm) - 10 Less likely to be burned if used at close range
Working temperature (℃) -40 85 Industrial grade