[Communication interface]：RS485
[Working voltage]：DC 5~24V
[Positioning system]：BDS/GPS/GLONASS
[Communication protocol]：Modbus RTU
[Product size]：103*28*28.5mm
[Introduction]：EWD108-GN03(485) multi-mode GNSS positioning module is a positioning terminal that supports multiple positioning systems (BDS/GPS/GLONASS positioning system). The shell adopts three-proof coating, which is Anti-Fungal, Anti-Humidity, and Anti-Salt Spray.The device outputs positioning information through the Modbus RTU protocol, supports outputting RMC-ASCII strings that comply with the NMEA0183 protocol and storing them in separate registers. The serial port baud rate can reach up to 115200bps, and can be easily modified through the Modbus RTU protocol, which is convenient and fast.
Official Store| Modem | Interface Signal | Transmission Method | Network protocol | Working voltage(V) | Installation | Sizemm | Feature | Manual | Sample |
|---|---|---|---|---|---|---|---|---|---|
| EWD108-GN06B(TTL) | UART | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | BDS Single Beidou Satellite Positioning Terminal | ||
| EWD108-GN06B(232) | RS232 | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | BDS Single Beidou Satellite Positioning Terminal | ||
| EWD108-GN06B(485) | RS485 | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | BDS Single Beidou Satellite Positioning Terminal | ||
| EWD108-GN03B(TTL) | UART | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | BDS single Beidou satellite positioning terminal | ||
| EWD108-GN03B(232) | RS232 | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | BDS Single Beidou Satellite Positioning Terminal | ||
| EWD108-GN03B(485) | RS485 | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | BDS Single Beidou Satellite Positioning Terminal | ||
| EWD108-GN05(TTL) | UART | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | GNSS module for BDS/GPS/GLONASS/GALILEO/QZSS/SBAS positioning system | ||
| EWD108-GN05(485) | RS485 | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | GNSS module for BDS/GPS/GLONASS/GALILEO/QZSS/SBAS positioning system | ||
| EWD108-GN05(232) | RS232 RS485 | - | TCP/UDP, MQTT, HTTP | DC 5～36 | Positioning hole | 84*82*25 | European version high performance 4G DTU | ||
| EWD108-GN04(TTL) | UART | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | GNSS module for BDS/GPS/GLONASS/GALILEO positioning system | ||
| EWD108-GN04(485) | RS485 | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | GNSS module for BDS/GPS/GLONASS/GALILEO positioning system | ||
| EWD108-GN04(232) | RS232 | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | GNSS module for BDS/GPS/GLONASS/GALILEO positioning system | ||
| EWD108-GN03(TTL) | UART | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | GNSS module for BDS/GPS/GLONASS positioning system | ||
| EWD108-GN03(485) | RS485 | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | GNSS positioning module for BDS/GPS/GLONASS positioning system | ||
| EWD108-GN03(232) | RS485 | - | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | GNSS module for BDS/GPS/GLONASS positioning system | ||
| E108-GN02S | UART GPIO | - | NMEA0183 V4.1 and previous versions | DC 2.8-4.2 | Half hole（SMT） | 16*12*2.4 | Low power consumption, multi-mode satellite positioning module | ||
| E108-GN02 | UART GPIO | - | NMEA0183 V4.1 and previous versions | DC 2.8-4.2 | Half hole (SMT surface mount) | 10.1*9.7*2.4 | Low power consumption, multi-mode satellite positioning module | ||
| E108-GN02D | UART GPIO | - | NMEA0183 V4.1 and previous versions | DC 3-5.5 | 6P wiring seat, spacing 1.0mm | 22*20*5.8 | Low power consumption, multi-mode satellite positioning module |