EWD108-GN03(232) BDS/GPS/GLONASS Multi-mode GNSS positioning module Standard ModBus RTU protocol Adopt guide rail installation
[Working voltage]：DC 5~24V
[Positioning system]：BDS/GPS/GLONASS
[Communication protocol]： Modbus RTU
[Product size]：103*28*28.5mm
[Introduction]：EWD108-GN03(232) multi-mode GNSS positioning module is a positioning terminal that supports multiple positioning systems (BDS/GPS/GLONASS positioning system). The shell adopts three-proof coating, which is Anti-Fungal, Anti-Humidity, and Anti-Salt Spray.The device outputs positioning information through the Modbus RTU protocol, supports the output of RMC-ASCII strings that comply with the NMEA0183 protocol and separate registers for storage, and the serial port baud rate can reach up to 115200bps, which can be easily modified through the Modbus RTU protocol, which is convenient and fast.
Official Store| Modem | Interface Signal | Transmission Method | Network protocol | Working voltage(V) | Installation | Sizemm | Feature | Manual | Sample |
|---|---|---|---|---|---|---|---|---|---|
| EWD108-GN05(TTL) | UART | GNSS positioning | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | GNSS module for BDS/GPS/GLONASS/GALILEO/QZSS/SBAS positioning system | ||
| EWD108-GN05(485) | RS485 | GNSS positioning | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | GNSS module for BDS/GPS/GLONASS/GALILEO/QZSS/SBAS positioning system | ||
| EWD108-GN05(232) | RS232 RS485 | GNSS positioning | TCP/UDP, MQTT, HTTP | DC 5～36 | Positioning hole | 84*82*25 | European version high performance 4G DTU | ||
| EWD108-GN04(TTL) | UART | GNSS positioning | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | GNSS module for BDS/GPS/GLONASS/GALILEO positioning system | ||
| EWD108-GN04(485) | RS485 | GNSS positioning | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | GNSS module for BDS/GPS/GLONASS/GALILEO positioning system | ||
| EWD108-GN04(232) | RS232 | GNSS positioning | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | GNSS module for BDS/GPS/GLONASS/GALILEO positioning system | ||
| EWD108-GN03(TTL) | UART | GNSS positioning | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | GNSS module for BDS/GPS/GLONASS positioning system | ||
| EWD108-GN03(485) | RS485 | GNSS positioning | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | GNSS positioning module for BDS/GPS/GLONASS positioning system | ||
| EWD108-GN03(232) | RS485 | GNSS positioning | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | GNSS module for BDS/GPS/GLONASS positioning system | ||
| E108-GN02S | UART GPIO | GNSS positioning | NMEA0183 V4.1 and previous versions | DC 2.8-4.2 | Half hole（SMT） | 16*12*2.4 | Low power consumption, multi-mode satellite positioning module | ||
| E108-D01 | RS485 | GNSS positioning | Modbus RTU | DC 5~36V | Guide rail type | 96.5*50*31.4 | Multi-mode GNSS positioning module can be combined arbitrarily | ||
| E108-GN02 | UART GPIO | GNSS positioning | NMEA0183 V4.1 and previous versions | DC 2.8-4.2 | Half hole (SMT surface mount) | 10.1*9.7*2.4 | Low power consumption, multi-mode satellite positioning module | ||
| E108-GN02D | UART GPIO | GNSS positioning | NMEA0183 V4.1 and previous versions | DC 3-5.5 | 6P wiring seat, spacing 1.0mm | 22*20*5.8 | Low power consumption, multi-mode satellite positioning module |