EID101-B111 CANFD Bus Isolation Repeater Support CANFD Compatible with CAN 2.0A/B CANFD Hub
[Communication Interface]：CAN
[Operating Voltage]： DC 8～28V
[Size]：100.1*17.6*112.3mm
[Introduction]：The EID101-B111 communication converter is a rail-mounted CANFD isolation repeater independently developed by Chengdu EBITE Electronics Technology Co., Ltd. This product uses a wide DC voltage range of 8V to 28V, supports up to 5Mbps CANFD, is compatible with CAN 2.0, and has a built-in 120Ω matching resistor. The product is coated with a conformal coating, providing protection against mold, moisture, and salt spray.
Official Store
| Serial Number | pin | illustrate |
| 1 | VCC2 | Power Supply 2 (DC 8-28V) Note: Only one power supply (Power Supply 1 or Power Supply 2) can be input at a time. |
| 2 | GND2 | Power supply 2 negative |
| 3 | CAN2_R | Shorting CAN2_R and CAN2_H enables the built-in 120Ω matching resistor of CAN2. |
| 4 | CAN2_L | CAN2 channel bus low |
| 5 | CAN2_G | CAN2 channel bus ground |
| 6 | CAN2_H | CAN2 channel bus height |
| 7 | LED-CAN2 | CAN2 data indicator light: flashes when data is being transmitted or received (the light dims when receiving data). |
| 8 | LED-PWR | The power indicator light is normally on. |
| 9 | LED-CAN1 | CAN1 Data Indicator: Flashes when data is being transmitted or received (brighter when receiving data). |
| 10 | CAN1_H | CAN1 channel bus high |
| 11 | CAN1_G | CAN1 channel bus ground |
| 12 | CAN1_L | CAN1 channel bus low |
| 13 | CAN1_R | Shorting CAN1_R and CAN1_H enables the built-in 120Ω matching resistor of CAN1. |
| 14 | GND1 | Power supply 1 negative |
| 15 | VCC1 | Power Supply 1 (DC 8-28V) Note: Only one power supply (Power Supply 1 or Power Supply 2) can be input at a time. |