T113-i；

Dual-core ARM Cortex-A7@1.2GHz；

RISC-V CPU；

HiFi4 DSP；

On-board DDR3 SDRAM, 16-bit wide, 256MB/512MB/1GB optional;

On-board 8GB eMMC / On-board 256MB SPI NAND FLASH optional;

Parallel RGB 24-bit color output, supporting up to 1920×1080@60fps;

Dual-channel LVDS output, supporting up to 1920×1080@60fps;

4-lane MIPI DSI, supporting up to 1920×1200@60fps;

Note: Some of the I/Os of the above display interface are multiplexed and cannot be used at the same time; serial RGB output supports up to 800×480@60fps;

8-bit parallel digital camera interface, supports 1080P@30fps, maximum 148.5MHz pixel clock;

1 CVBS decoder, supports NTSC and PAL formats, 10-bit video ADC;

Supports NTSC and PAL formats, 10-bit video DAC;

2-channel DAC, sampling rate 8KHz~192KHz;

3-channel ADC, sampling rate 8KHz~48KHz;

3 MIC IN, 1 LINE IN, 1 FM IN;

1 differential LINE OUT, 1 Headphone OUT;

Support RMII/RGMII interface (10/100/1000Mbps);

Support SD3.0, SDIO3.0, MMC5.0 protocols;

SDC0: 4-bit data bus (recommended as backplane Micro SD function);

SDC1: 4-bit data bus;

Note: SDC2 is not led to the stamp hole and is used to connect eMMC or FLASH memory chips on the board;

Complies with USB2.0 standard and supports USB HOST and USB Device functions;

Comply with USB2.0 standard and support USB HOS function;

Supports standard mode (100Kbps) and high-speed mode (400Kbps);

Supports SPI mode and DBI (Display Bus Interface) mode;

Supports Master Mode, Slave Mode, and 1 chip select signal;

Supports up to 100MHz operating frequency;

Maximum 4Mbps baud rate (64MHz APB clock), supports hardware or software flow control;

0~100% adjustable duty cycle, supports output and input capture, output frequency is 0~24MHz or 100MHz;

12-bit SAR type A/D converter with sampling frequency up to 1MHz;

12-bit SAR type A/D converter, sampling frequency up to 1MHz, supports 4-wire resistive touch screen;

6-bit A/D converter, sampling frequency up to 2KHz, supports hold keys and general keys;

Supports 1024 LED serial connections, LED data transmission rate up to 800Kbps;

Support full duplex, sampling rate 8KHz~384KHz;

Supports up to 8 channels, sampling rate 8KHz~48KHz;

One Wire Audio, compatible with S/PDIF protocol;

Contains CIR TX and CIR RX, which can be controlled remotely through infrared;

Support CAN 2.0A and CAN 2.0B protocols;

Contains ARM, RISC-V and HiFi4 DSP JTAG;

Software configures GPIO function and supports interrupt input;