[Processor model]:RK3506G
[Processor frequency]:1.2GHz
[Memory capacity]:128MB
[Storage capacity]:256MB
[Size]:85*56mm
[Product weight]:36.8±5g
[Introduction]:ECB41-PGE is a cost-effective, low-power industrial-grade single-board computer based on the ECK41-E series core board. The core board is a 140Pin stamp hole + LGA package and can be welded to the base board through SMT. The baseboard design makes full use of the core board interfaces, including MIPI DSI display interface, USB, SDIO, debugging interface, Ethernet interface, audio interface and rich extended GPIO interfaces. The design level of the single-board computer is higher than that of ordinary development boards. It can not only be used for functional verification of core boards, but can also be directly used in industrial scenarios in batches.
| Pin serial number | Pin definition | Pin serial number | Pin definition |
| 1 | 3V3 | 2 | 5V |
| 3 | GPIO0_C0/I2C0_SDA | 4 | 5V |
| 5 | GPIO0_B7/I2C0_SCL | 6 | GND |
| 7 | GPIO0_B5/SAI2_MCLK | 8 | GPIO1_D2/UART1_TX |
| 9 | GND | 10 | GPIO1_D3/UART1_RX |
| 11 | GPIO1_A1 | 12 | GPIO0_B4/SAI2_SCLK |
| 13 | GPIO0_D0 | 14 | GND |
| 15 | GPIO0_A5//UART3_TX | 16 | GPIO1_C2/CAN1_TX |
| 17 | 3V3 | 18 | GPIO1_C3/CAN1_RX |
| 19 | GPIO0_B1/SPI1_MOSI | 20 | GND |
| 21 | GPIO0_B2/SPI1_MISO | 22 | GPIO0_A4/UART3_RX |
| 23 | GPIO0_B0/SPI1_CLK | 24 | GPIO0_B6/SPI1_CSN0 |
| 25 | GND | 26 | GPIO0_A7/SPI1_CSN1 |
| 27 | GPIO0_C2/I2C1_SDA | 28 | GPIO0_C1/I2C1_SCL |
| 29 | GPIO1_B1/CAN0_TX | 30 | GND |
| 31 | GPIO1_B2/CAN0_RX | 32 | GPIO1_B3/PWM0 |
| 33 | GPIO1_D1/PWM1 | 34 | GND |
| 35 | GPIO0_B3/SAI2_LRCK | 36 | GPIO0_A3/UART4_TX |
| 37 | GPIO0_A2/UART4_RX | 38 | GPIO0_A0/SAI2_SDI |
| 39 | GND | 40 | GPIO0_A1/SAI2_SDO |
| Pin serial number | Pin definition | Function description | Pin level |
| 1 | GND | GND | 0V |
| 2 | DSI_LCD_RESET | LCD screen reset signal | 1V8 |
| 3 | GND | GND | 0V |
| 4 | NC | / | 1V8 |
| 5 | NC | / | 1V8 |
| 6 | GND | GND | 0V |
| 7 | NC | / | 1V8 |
| 8 | NC | / | 1V8 |
| 9 | GND | GND | 0V |
| 10 | DSI_TX_D0N | DSI differential signal | 1V8 |
| 11 | DSI_TX_D0P | DSI differential signal | 1V8 |
| 12 | GND | GND | 0V |
| 13 | DSI_TX_CLKN | DSI differential clock signal | 1V8 |
| 14 | DSI_TX_CLKP | DSI differential clock signal | 1V8 |
| 15 | GND | GND | 0V |
| 16 | DSI_TX_D1N | DSI differential signal | 1V8 |
| 17 | DSI_TX_D1P | DSI differential signal | 1V8 |
| 18 | GND | GND | 0V |
| 19 | / | LCD detection pin | / |
| 20 | DSI_BL_CTR | Backlight control signal | 3V3 |
| 21 | DSI_TP_RST | Touch screen reset signal | 3V3 |
| 22 | I2C2_SDA | I2C data signals | 3V3 |
| 23 | I2C2_SCL | I2C clock signal | 3V3 |
| 24 | DSI_TP_INT | Touch screen interrupts signal | 3V3 |
| 25 | DSI_5V | 5V power supply | 5V |
| 26 | DSI_5V | 5V power supply | 5V |