ECB31-P4T13SA2ME8G industrial-grade high-performance ARM embedded system Allwinner T113-S single-board computer Compatible with Raspberry Pi
[Processor Model]：T113-S
[Processor Frequency]：1.2GHz
[Memory Capacity]：256MB
[Storage Capacity]：8GB
[Size]：85*56mm
[Product Weight]：46 ± 5g
[Introduction]：The ECB31-P4T13SA2ME8G is a high-performance industrial-grade single-board computer launched by EBB based on the Allwinner T113-S series processor. The single-board computer consists of a core board (ECK31-T13SA2ME8G) and a baseboard, which are assembled using a stamp-hole soldering method. Its form factor is compatible with Raspberry Pi. Its design level is higher than ordinary development boards, and it can be used in large quantities in industrial scenarios.
Official Store| Power input | 12V_1A DC input | |
| processor | Allwinner T113-S processor: Dual Arm Cortex-A7 core, 1.2GHz; RISC-V; HiFi4 DSP; | |
| storage | Memory | 256MB，DDR3； |
| FLASH | 8GB，eMMC； | |
| show | One 26-pin FPC MIPI display interface, supporting 4 lanes, with a maximum resolution of 1080P (1920×1080@60fps), and supports touch screen; | |
| One CVBS output, supporting NTSC and PAL standards; | ||
| One CVBS input, supporting NTSC and PAL standards; | ||
| USB HOST | 3-port USB 2.0 host; | |
| USB OTG | One USB OTG port, Type-C interface; | |
| network port | One 10/100/1000M adaptive RJ45 Ethernet port; | |
| WiFi | 1 line 2.4G & 5G Wi-Fi; | |
| TF | One TF card slot, supporting insertion/removal detection; | |
| audio | One 3.5mm audio jack supports headphone output and microphone input; | |
| debug | One debug serial port, Type-C interface type; | |
| CAN | 2-channel CAN interface, TTL level, with expansion interface leads; | |
| GPIO | 28 GPIOs, with some functions reused and expansion interfaces brought out; | |
| serial port | One UART communication serial port, TTL level, with an expansion interface lead-out; | |
| I2C | 2-way I2C, with expansion interfaces brought out; | |
| button | One reset button; | |
| indicator lights | One power indicator light; | |
| One operating indicator light; | ||
| One debug indicator light; | ||
| Watchdog | Supports in-chip watchdog functionality; | |
| RTC | 1-channel 1.25mm RTC battery holder; | |
| Power output | Two 5V 1A power outputs with expansion interface leads; | |
| Two 3.3V 1A power outputs with expansion interface leads; | ||