Home >Industrial Computing>SBC Module>ECB20 Series
ECB20-6Y28A5ME8G-I NXP i.MX6ULL high-performance 2.5-inch single-board computer Rich interfaces

[Processor Model]: MCIMX6Y2CVM08AB

[Processor Frequency]: 792MHz

[Memory Capacity]:512MB

[Operating Voltage]: DC 12V

[Product Dimensions]:100*72mm

[Introduction]:The ECB20-6Y28A5ME8G-I is a high-performance 2.5-inch single-board computer from EBYTE, based on the NXP i.MX 6ULL ​​processor. The computer consists of a core board (ECB20-6Y28A5ME8G-I) and a baseboard assembled using a stamp-hole soldering method. The computer supports Linux systems and features a rich set of peripheral interfaces. Its design level surpasses that of ordinary development boards, making it suitable for mass production and industrial applications.

Power input

12V_1A DC input; 1 DC round connector, with 1 3.81 DC phoenix terminal in parallel;

processor

MCIMX6Y2CVM08AB;

i.MX 6ULL Applications Processors for Industrial;

Single Arm Cortex-A7 core, 792MHz;

storage Memory

512MB,DDR3L;

FLASH

8GB,eMMC;

show

One 40-pin FPC RGB888 display interface, supporting a maximum resolution of WXGA (1366×768@60fps), and supporting touch screen and backlight adjustment;

One HDMI port, supporting a maximum resolution of WXGA (1366×768@60fps).

CSI

One-channel multiplexed CSI camera interface with extended interface leads;

USB HOST

2-port USB 2.0 host;

USB OTG

One USB OTG port with a Type-C interface;

network port

Two 10/100M adaptive RJ45 Ethernet ports;

4G

It has a reserved MINI-PCIE 4G module interface with one USB signal, which can be used to connect Quectel EC20/EC25 4G modules; and one micro-SIM card slot.

Wi-Fi

1路2.4GHz&5.8GHz Wi-Fi;

TF

One TF card slot, supporting insertion/removal detection;

audio

One headphone output with an expansion interface; one microphone input with an expansion interface.

BOOT

One-way start mode DIP switch;

debug

1-channel UART debugging serial port;

UART

2-way multiplexed UART communication interface, with extended interface leads out;

CAN

2-channel multiplexed CAN_FD interface, TTL level, with expansion interface leads;

SPI

One-way multiplexed SPI interface, TTL level, with expansion interface leads out;

GPIO

34-channel multiplexed GPIO, with extended interface exposed;

I2C

2-way I2C, with expansion interfaces brought out;

button

One reset button; one power button;

indicator lights

One power indicator light; one operation indicator light; one user indicator light;

Watchdog

Supports in-chip watchdog functionality;

RTC

1-channel 1.25mm RTC battery holder;

Power output

Two 5V 1A power outputs with expansion interface leads; Two 3.3V 1A power outputs with expansion interface leads;