ECB10-PGD-I 256/512MB Memory High cost-performance single-board computer Rich I/O interfaces, supports Linux Raspberry Pi compatible
[Processor Model]：STM32MP13xDAF7
[Processor Frequency]：1GHz
[Memory]：256/512MB
[Storage Capacity]：8GHz
[Size]：100*72mm
[Product Weight]：58 ± 5g
[Introduction]：The ECB10-PGD is based on the ECK10-135D series core board, which features 204-pin DDR3 gold fingers for easy installation and removal. The baseboard design fully utilizes the core board's interfaces, providing access to features including an RGB888 display interface, USB 2.0, USB OTG, a TF card slot, a debugging interface, an Ethernet interface, audio interfaces, and a rich array of expansion GPIO interfaces.
Official Store
| Pin number | Pin Definitions | MCU I/O | Function Description |
| 1 | LCD_RST | PG12 | Screen display reset |
| 2 | TP_INT | PD8 | Touch interruption |
| 3 | TP_SCL | PF2 | Touch I2C clock signal, with 2.2K pull-up. |
| 4 | NC | / | / |
| 5 | TP_SDA | PF1 | Touch I2C data signal, with 2.2K pull-up. |
| 6 | TP_RST | PG8 | Touch reset |
| 7 | LCD_PWM | PD12 | Screen backlight adjustment |
| 8 | LCD_DE | PH9 | Data enable signal |
| 9 | LCD_VSYNC | PG4 | Frame synchronization signal |
| 10 | LCD_HSYNC | PE9 | Horizontal synchronization signal |
| 11 | LCD_CLK | PD9 | Pixel clock signal |
| 12 | GND | / | power ground |
| 13 | LCD_B7 | PE15 | Blue signal B7 |
| 14 | LCD_B6 | PB6 | Blue signal B6 |
| 15 | LCD_B5 | PD15 | Blue signal B5 |
| 16 | LCD_B4 | PH3 | Blue signal B4 |
| 17 | LCD_B3 | PF8 | Blue signal B3 |
| 18 | LCD_B2 | PH7 | Blue signal B2 |
| 19 | LCD_B1 | PE13 | Blue signal B1 |
| 20 | LCD_B0 | PD5 | Blue signal B0 |
| 21 | GND | / | power ground |
| 22 | LCD_G7 | PE4 | Green signal G7 |
| 23 | LCD_G6 | PE12 | Green signal G6 |
| 24 | LCD_G5 | PD10 | Green signal G5 |
| 25 | LCD_G4 | PD13 | Green signal G4 |
| 26 | LCD_G3 | PF3 | Green signal G3 |
| 27 | LCD_G2 | PD1 | Green signal G2 |
| 28 | LCD_G1 | PH2 | Green signal G1 |
| 29 | LCD_G0 | PE14 | Green signal G0 |
| 30 | GND | / | power ground |
| 31 | LCD_R7 | PD11 | Red signal R7 |
| 32 | LCD_R6 | PH8 | Red signal R6 |
| 33 | LCD_R5 | PE7 | Red signal R5 |
| 34 | LCD_R4 | _PD14 | Red signal R4 |
| 35 | LCD_R3 | PB12 | Red signal R3 |
| 36 | LCD_R2 | PG7 | Red signal R2 |
| 37 | LCD_R1 | PD4 | Red signal R1 |
| 38 | LCD_R0 | PA15 | Red signal R0 |
| 39 | VDD_5V | / | 5V power supply |
| 40 | VDD_5V | / | 5V power supply |
Raspberry Pi Expansion Interface Pin Definition Table
| Pin number | Pin Definitions | Pin number | Pin Definitions |
| 1 | 3V3 | 2 | 5V |
| 3 | PD7/I2C3_SDA | 4 | 5V |
| 5 | PH12/I2C3_SCL | 6 | GND |
| 7 | GPIO_PF14 | 8 | PE1/UART8_TX |
| 9 | GND | 10 | PF9/UART8_RX |
| 11 | PE8/UART7_TX | 12 | GPIO_PD0 |
| 13 | PE10/UART7_RX | 14 | GND |
| 15 | GPIO_PF10 | 16 | PG0/CAN2_TX |
| 17 | 3V3 | 18 | PE0/CAN2_RX |
| 19 | PH10/SPI2_MOSI | 20 | GND |
| 21 | PB5/SPI2_MISO | 22 | GPIO_PD6 |
| 23 | PB10/SPI2_SCK | 24 | PB13/SPI2_NSS |
| 25 | GND | 26 | GPIO_PG15 |
| 27 | PB8/I2C4_SDA | 28 | PE2/I2C4_SCL |
| 29 | PG10/CAN1_TX | 30 | GND |
| 31 | PG9/CAN1_RX | 32 | PE11/PWM1 |
| 33 | PF13/PWM2 | 34 | GND |
| 35 | GPIO_PF5 | 36 | GPIO_PF12 |
| 37 | PI12 | 38 | GPIO_PF15 |
| 39 | GND | 40 | GPIO_PH4 |