[Processor Model]：STM32MP13xDAF7
[Processor Frequency]：1GHz
[Memory]：256/512MB
[Storage Capacity]：8GHz
[Size]：100*72mm
[Product Weight]：58 ± 5g
[Introduction]：The ECB10-PGD is based on the ECK10-135D series core board, which features 204-pin DDR3 gold fingers for easy installation and removal. The baseboard design fully utilizes the core board's interfaces, providing access to features including an RGB888 display interface, USB 2.0, USB OTG, a TF card slot, a debugging interface, an Ethernet interface, audio interfaces, and a rich array of expansion GPIO interfaces.
Official Store| Power input | One DC socket, 12V input; |
| Display Output | One 40-pin FPC parallel display interface, supporting a maximum resolution of WXGA (1366×768@60fps), RGB888 parallel display output, and touchscreen support; |
| USB HOST | 3-port USB 2.0 host; |
| USB OTG | 1 USB OTG； |
| Ethernet | Two 10/100/1000M adaptive RJ45 Ethernet ports; |
| TF card | One TF card slot, supporting insertion/removal detection; |
| Audio | One 3.5mm four-segment headphone jack, supporting microphone input; |
| debug | 1-channel UART debug serial port, Type-C interface; |
| GPIO | One set of 2.54mm 2x20Pin standard RPI expansion interface, providing 3.3V and 5V power output, a total of 28 GPIO ports, multiplexing 1 set of SPI interface, 2 sets of I2C interface, 2 sets of UART, and 2 sets of FDCAN; |
| button | One RESET button; |
| indicator light | One power indicator light; |
One operating indicator light; | |
One debug indicator light; | |
| RTC | 1-channel 1.25mm 1x2Pin RTC battery holder; |
| BOOT | One DIP switch selects the startup method; |
| PCB size | 100x72x1.6mm, 2.5 inches; |