[Communication Interface]:RS485
[Transmission Distance]: 5km
[Operating Voltage]:DC 8-28V
[Installation Method]:DIN-Rail Mounting
[Size]:113*72*65mm
[Product weight]:150 ± 5g
[Introduction]:The Wireless remote transmission switch is a terminal device that uses LoRa modulation technology to achieve wireless remote transmission of switching values. It supports 4 digital inputs (DIs) for data acquisition and 4 relay outputs (DOs) for control. Its core function is to achieve remote synchronous control without the need for wiring. It is highly user-friendly and easy to integrate into users' systems. It accepts a DC input voltage of 8-28V. It is coated with conformal coating, offering anti-mold, anti-humidity, and anti-salt spray properties.


| serial number | E860-DTU(4040-400SL22)-V2 Device Port Description |
| 1 | Switch input port 1 |
| 2 | Switch input port 2 |
| 3 | Switch common terminal |
| 4 | Switch input port 3 |
| 5 | Switch input port 4 |
| 6 | Switch common terminal |
| 7 | GND |
| 8 | RS485-A |
| 9 | RS485-B |
| 10 | PE (protective earth) |
| 11 | DC 8~28V(V-) |
| 12 | DC 8~28V(V+) |
| 13 | Relay output normally open port 1 |
| 14 | Relay output COM port 1 |
| 15 | Relay output normally closed port 1 |
| 16 | Relay output normally open port 2 |
| 17 | Relay output COM port 2 |
| 18 | Relay output normally closed port 2 |
| 19 | Relay output normally open port 3 |
| 20 | Relay output COM port 3 |
| 21 | Relay output normally closed port 3 |
| 22 | Relay output normally open port 4 |
| 23 | Relay output COM port 4 |
| 24 | Relay output normally closed port 4 |
| 25 | STATE configuration reset button |
| port | LED indicator color | illustrate |
| PWR | Blue LED | Power indicator light, always on when powered on, off when no power |
| LINK | Yellow LED | 1. 1 to many (including 1 to 1) - bidirectional (when the devices have the same number of channels): As long as one slave is successfully connected to the master, the master's LINK indicator is always on; after the slave is successfully connected to the master, the slave's LINK indicator is always on; |
2. 1 to many - two-way (different number of channels, each channel of the host is independently controlled by the slave): the number of times the host's LINK indicator flashes depends on the number of devices connected (cycle: 300ms, after flashing, it turns off for 1s, and then flashes again). For example: if 3 devices are connected, the LINK indicator flashes 3 times according to the cycle, then turns off for 1s and flashes again; | ||
| STATE (indicator light) | Blue LED | 1. Host: The indicator light is always on; |
2. Slave: indicator light flashes slowly; | ||
3. Pairing: The indicator light flashes quickly; | ||
4. Not paired: the indicator light is off; | ||
| STATE (button) | White buttons | 1. Press and hold for 2 seconds to enter pairing mode; |
2. Press and hold for more than 6 seconds to restore to factory settings; | ||
3. Press and hold to cycle through the pairing state and reset state; | ||
5. In pairing mode, short press to exit pairing mode | ||
| DI1-DI8 | Green LED | Device switch input data indication, normally on means there is input, normally closed means there is no input |
| DO1-DO8 | Red LED | Each of the 8 relay output switch indicators corresponds to the 8 relay outputs; normally on indicates output is in progress, and normally closed indicates no output. |