E70-400M14S1B CC1312R Hardware SoC Module Stamp Hole/IPEX Antenna
[Chip solution]：CC1312R
[Working frequency band]： 410~490MHz
[Transmission power]：14dBm
[Communication distance]：1.5km
[Product size]：16*26mm
[Product weight]：2.5g±0.1g
[Introduction]：E70-400M14S1B adopts CC1312R RF chip originally imported from Texas Instruments (TI), which integrates single-chip microcomputer and wireless transceiver, and adopts 48MHz industrial-grade high-precision low-temperature drift crystal oscillator to ensure its industrial characteristics and stable performance. The wireless module is a pure hardware SOC module, there is no program in the factory, and the user needs to carry out secondary development before it can be used
| Serial number | Pin | Pin direction | Remark |
| 1 | GND | reference | Module ground wire |
| 2 | ANT | - | Antenna (50Ω characteristic impedance) |
| 3 | X32K_Q1 | input Output | 32.768K quartz crystal oscillator connected with pin 4 |
| 4 | X32K_Q2 | input Output | 32.768K quartz crystal connected with pin 3 |
| 5 | DIO_1 | input Output | MCU GPIO |
| 6 | DIO_2 | input Output | MCU GPIO |
| 7 | DIO_3 | input Output | MCU GPIO |
| 8 | DIO_4 | input Output | MCU GPIO |
| 9 | DIO_5 | input Output | MCU GPIO |
| 10 | DIO_6 | input Output | MCU GPIO |
| 11 | DIO_7 | input Output | MCU GPIO |
| 12 | DIO_8 | input Output | MCU GPIO |
| 13 | DIO_9 | input Output | MCU GPIO |
| 14 | DIO_10 | input Output | MCU GPIO |
| 15 | DIO_11 | input Output | MCU GPIO |
| 16 | GND | reference | Module ground wire |
| 17 | DIO_12 | input Output | MCU GPIO |
| 18 | DIO_13 | input Output | MCU GPIO |
| 19 | DIO_14 | input Output | MCU GPIO |
| 20 | DIO_15 | input Output | MCU GPIO |
| 21 | TMSC | enter | JTAG TMSC |
| 22 | TCKC | enter | JTAG TCKC |
| 23 | DIO_16 | input Output | MCU GPIO |
| 24 | DIO_17 | input Output | MCU GPIO |
| 25 | DIO_18 | input Output | MCU GPIO |
| 26 | VCC | - | Positive reference of module power supply, voltage range: 2.2～3.8V DC |
| 27 | GND | reference | Module ground wire |
| 28 | DIO_19 | input Output | MCU GPIO |
| 29 | DIO_20 | input Output | MCU GPIO |
| 30 | DIO_21 | input Output | MCU GPIO |
| 31 | DIO_22 | input Output | MCU GPIO |
| 32 | RESET | enter | Module reset pin |
| 33 | DIO_23 | input Output | MCU GPIO |
| 34 | DIO_24 | input Output | MCU GPIO |
| 35 | DIO_25 | input Output | MCU GPIO |
| 36 | DIO_26 | input Output | MCU GPIO |
| 37 | DIO_27 | input Output | MCU GPIO |
| 38 | DIO_28 | input Output | MCU GPIO |
| 39 | DIO_29 | input Output | MCU GPIO |
| 40 | DIO_30 | input Output | MCU GPIO |
| 41 | GND | reference | Module ground wire |
| 42 | GND | reference | Module ground wire |