Home >Module>SPI/SOC/UART>CMT2300A

E49-400M20S4 Ebyte wireless data transmission Pure hardware module Low output power SPI communication interface

[IC]:CMT2300A

[Frequency]:410~510MHz

[Power]:20dBm

[Distance]:2.5km

[Size]:16*16mm

[Product weight]:0.9±1g

[Introduction]:E49-400M20S4 is a cost-efective wireless data transmission module launched by Chengdu Ebyte. It is a pure hardware module based on CMT2300A.E49- 400M20S4 supports a maximum transmit power of 30dBm, and users can set a lower output power to save power consumption. The module works in the .433/470MHz frequency band. With small size and low power consumption. Since this module is a pure RF transceiver module, it needs to be driven by an MCU or adedicated SPI debugging tool.

Main parameter Min. Max. Remark
Power supply(V) 0 3.6 Voltage over 3.6V will cause permanent damage to module
Blocking power(dBm) - 10 Chances of burn is slim when modules are used in short distance
Operating temperature(℃) -40 +85 Industrial
Main parameter Min Type Max Remark
Operating voltage(V) 1.8 3.3 3.6 Over 3.6V may permanently burn the module
Communication level(V) - 3.3 - -
Operating temperature(℃) -40 - +85 Industrial grade
Operating frequency(MHz) 410 433 510 -
TX current(mA) - 85 - -
RX current(mA) - 8.5 - -
Sleep current (μA) - 1 - DutyCycle=OFF,300nA;DutyCycle=ON,800nA
Max TX power(dBm) - 20 - -
Receiving sensitivity(dBm) -116 -117 -118 Air data rate is 1.2kbps
Main parameter Description Remark
Reference distance 2500m Clear and open, antenna height 2.5 meters, air rate 2.4kbps
Crystal Oscillator 26MHz -
Package SMD -
Interface SPI 3 lines SPI
Size 16*16mm -
RF interface Stamp Equivalent impedance is about 50Ω