Home >Module>SPI/SOC/UART>TLSR8208
E35-2G4T20SX 2.4G wireless serial port module TLSR8208 chip solution UART Interface

[Chip Solution]:TLSR8208

[Communication Range]:1.6km

[Communication Interface]:UART

[Size]:20 x 14mm

[Product weight]:1.2 ± 0.1g

[Introduction]:E35-2G4T20SX is a new-generation 2.4GHz, 20dBm wireless serial port module based on Telink's TLSR8208 chip. It features multiple transmission modes, operates in the 2400-2480MHz frequency band, and utilizes a standard stamp-hole surface-mount package. It also includes a UART communication interface for easy development and use. This wireless module operates in the ISM band and supports wireless transparent transmission, fixed-point transmission, broadcast transmission, serial port upgrades, and communication encryption. Custom development services are also available.

RF parameters Parameter value Remark
Operating frequency band 2400~2480MHz Support ISM band
Transmit power 20 dBm Software adjustable
Receive sensitivity -98 dBm Air speed 500Kbps
FIFO 1024 Byte -
Maximum packet length 48 Byte Supports 23Byte~48Byte packet length, software adjustable, default 23Byte
Air speed 250Kbps~2Mbps Software adjustable, default airspeed 250Kbps
Modulation method FSK -
Communication distance 1.6km Clear and open environment, antenna gain 5dBi, antenna height 1.5 meters, air rate 250kbps
Hardware Parameters describe Remark
Communication interface UART -
Packaging SMD -
Interface form stamp holes Pin spacing 1.27mm
Dimensions 20.0*14.0mm
Antenna type IPEX 1st generation/stamp hole Equivalent impedance is about 50Ω
Product Net Weight 1.2g ±0.1g
Electrical parameters Minimum Typical values Maximum unit Remark
Power supply voltage 2 3.3 3.6 In ≥3.3V can guarantee output power, exceeding 3.6V will permanently burn the module
Communication level - 3.3 - In When using 5V TTL, it is recommended to add level conversion, otherwise the module may be damaged.
Emission current - 190 - m.a. 3.3V power supply, antenna interface is standard 50 ohm impedance, instantaneous power consumption of transmitting power 20dBm
Accept current - 20 - m.a. -
Sleep current - 1.5 - μA Software shutdown
Operating temperature -40 20 85 Industrial-grade design
Operating humidity 10 60 90 % -
Storage temperature -40 20 125 -