E34-2G4D20D Full duplex 2km long distance 2.4GHz wireless data transmitter and receiver module rf transceiver nRF24L01+ module
[IC]：nRF24L01P
[Frequency]：2.4~2.518GHz
[Power]：10~20dBm
[Distance]：2.0km
[Interface]：UART
[Weight]：6.3±0.1g
[Introduction]：E34-2G4D20D is a 20dBm wireless transceiver module. It operates at 2400-2505MHz, provides an easy way to use. The typical feature of E34-2G4D20D is high speed. Under a variety of baud rate, E39-TTL-100 can achieve full duplex, no limitation about the package length, support continuous transmission.
Official Store
| Pin No. | Pin Item | Pin Direction | Pin Application |
|---|---|---|---|
| 1 | M0 | Input（weak pull-up） | Work with M1 & decide the four operating modes. Floating is not allowed, can be ground. |
| 2 | M1 | Input（weak pull-up） | Work with M0 & decide the four operating modes. Floating is not allowed, can be ground. |
| 3 | RXD | Input | TTL UART inputs, connects to external TXD (MCU, PC) output pin.Can be configured as open-drain or pull-up input |
| 4 | TXD | Output | TTL UART outputs, connects to external RXD (MCU, PC) input pin. Can be configured as open-drain or push-pull output |
| 5 | AUX | Output | To wake up the external MCU, during the procedure of self-check initialization, the pinoutputs low level. Can be configured as open-drain output or push-pull output (floating is allowed). |
| 6 | VCC | Input | Power supply 2.3V-5.2V DC |
| 7 | GND | Input | Ground |
| 8 | Fixing hole | Fixing hole | |
| 9 | Fixing hole | Fixing hole | |
| 10 | Fixing hole | Fixing hole | |