[IC]:AX5243
[Frequency]:425~450.5MHz
[Power]:24~33dBm
[Distance]:8.0km
[Interface]:UART
[Weight]:23.6±0.1g
[Introduction]:This module is a wireless transceiver module based on AX5243 from AXSEM(can be transmitter and receiver).The module uses narrow-band transmission with 2W tranmitting power,which makes the transmission distance 2 times more than ordinary equivalent module. E31-433T33D can be compatible with other E31 modules.
Pin No. | Pin Item | Pin Direction | Pin Application |
---|---|---|---|
1 | M0 | Input(weak pull-up) | Work with M1 & decide the four operating modes. Floating is not allowed, can be ground. |
2 | M1 | Input(weak pull-up) | Work with M0 & decide the four operating modes. Floating is not allowed, can be ground. |
3 | RXD | Input | TTL UART inputs, connects to external TXD (MCU, PC) output pin.Can be configured as open-drain or pull-up input. |
4 | TXD | Output | TTL UART outputs, connects to external RXD (MCU, PC) input pin.Can be configured as open-drain or push-pull output. |
5 | AUX | Output | To indicate module's working status & wakes up the external MCU. During the procedure of self-check initialization, the pin outputs low level. Can be configured as open-drainoutput or push-pull output (floating is allowed). |
6 | VCC | Input | Power supply 2.8V-5.5V DC |
7 | GND | Input | Ground |
8 | Fixing hole | Fixing hole | |
9 | Fixing hole | Fixing hole | |
10 | Fixing hole | Fixing hole | |
11 | Fixing hole | Fixing hole | |
12 | Fixing hole | Fixing hole | |
13 | Fixing hole | Fixing hole | |
14 | Fixing hole | Fixing hole | |
15 | Fixing hole | Fixing hole | |