E22P-915M30S 915 MHz SX1262 RF transceiver module 32MHz high-precision active temperature-compensated crystal oscillator
[Chip Solution]：SX1262
[Operating frequency]：915MHz
[Transmit power]：30dBm
[Communication diatance]：12km
[Size]：38.5 x 24mm
[Product weight]：5.1 ± 0.1g
[Introduction]：The E22P-915M30S series modules are surface-mount LoRa™ wireless modules developed independently based on Semtech's high-performance SX1262 RF chip. They operate in the 902-928MHz frequency band and utilize an industrial-grade, high-precision, active temperature-compensated crystal oscillator. By adding an RF front-end module (RF FEM), these modules improve anti-interference performance and communication range, further widening the gap with products using FSK and GFSK modulation methods.
Official Store| RF parameters | unit | model | Remark |
| Transmit power | dBm | 30 | Support software multi-level adjustable |
| Reference distance | m | 12000 | Clear and open air, antenna gain 5dBi, antenna height 2.5 meters, air data rate 2.4kbps |
| Operating frequency band | MHz | 902-928 | Support ISM band |
| Air speed | bps | 0.3k～62.5k | LoRa modulation mode, user programming control |
| Electrical parameters | unit | model | Remark | |
| Operating voltage | In | 3.3～5.5 | When the operating voltage is ≥5V, it can meet the output power requirements. When the operating voltage exceeds 5.5V, there is a risk of burning. | |
| Communication level | In | 3.3 | Using 5V TTL may cause burnout | |
| Power consumption | Emission current | m.a. | 640 | Instantaneous power consumption @5V |
| Receive current | m.a. | 23 | ||
| Sleep current | μA | 3 | Software shutdown | |
| temperature | Operating temperature | ℃ | -40～+85 | Industrial grade |
| Storage temperature | -40～+125 | |||
| Hardware Parameters | model | Remark |
| chip | SX1262 | - |
| FIFO | 255Byte | Maximum length of a single transmission |
| Crystal oscillator frequency | 32MHz | High-precision active temperature-compensated crystal oscillator |
| Modulation method | LoRa (recommended) | Next-generation LoRa ™ modulation technology |
| Interface | stamp holes | Pitch 2.54mm |
| Communication interface | SPI | 0～10Mbps |
| Product Net Weight | 5.1 | Tolerance tester 0.02g |
| Packaging | SMD | - |
| Antenna interface | Stamp hole/IPEX-1 | Characteristic impedance about 50 ohms |
| size | 38.5*24mm | Error value ±0.2mm |