Home >Module>LoRa>LLCC68

E220-230T30S LoRa E220 module New-Gen LoRa serial module LLCC68 chip solution LoRa spread spectrum technology TTL level output

[IC]:LLCC68

[Frequency]:220.125~236.125MHz

[Power]:30dBm

[Distance]:10km

[size]:25*40.5mm

[Features]:New generation of LoRa technology

[Introduction]:E220-230T30S is a new generation of LoRa wireless serial port module (UART), based on Semtech's original LLCC68 chip solution design. It has a variety of transmission methods, works in the (220.125 ~ 236.125MHz) frequency band (default 230.125MHz), LoRa spread spectrum technology, TTL level output, compatible with 3.3V and 5V IO port voltage.

Main parameter Min. Max. Remark
Power supply(V) 0 5.5 Voltage over 5.5V will cause permanent damage to module
Blocking power(dBm) - 10 Chances of burn is slim when modules are used in short distance
Operating temperature(℃) -40 85 /
Main parameter Min. Typ. Max Remark
Operating voltage(V) 3.0 5.0 5.5 ≥5.0 V ensures output power
Communication level(V) - 3.3 - For 5V TTL, it may be at risk of burning down
Operating temperature(℃) -40 - 85 Industrial design
Operating frequency(MHz) 220.125 - 236.125 Support ISM band
TX current(mA) - 610 - Instant power consumption
RX current(mA) - 17 - -
Sleep current (μA) - 3 - Software is shut down@30dBm
Max Tx power(dBm) 29.5 30.0 30.5 -
Receiving sensitivity(dBm) - -129 - -124dbm,BW_L=125kHz,SF =7,LORATM; -129dbm,BW_L=125kHz,SF =9,LORATM; -121dbm,BW_L=250kHz,SF =7,LORATM; -129dbm,BW_L=250kHz,SF =10,LORATM; -117dbm,BW_L=500kHz,SF =7,LORATM; -127dbm,BW_L=500kHz,SF =11,LORATM;
Air data rate(bps) 2.4k 2.4k 62.5k Controlled via user’s programming
Main parameter Description Remark
Distance for reference 10km Test condition:clear and open area, antenna gain: 5dBi,antenna height: 2.5m,air data rate: 2.4kbps
TX length 200 Byte Can be configured via command as 32/64/128/240 bytes per packet to transmit
Buffer 400 Byte -
Modulation LoRa New generation LoRa modulation technology
Communication interface UART Serial Port TTL level
Package SMD -
Connector IPEX/stamp hole Spacing 2.54mm
Size 25*40.5 mm -
Antenna IPEX/stamp hole 50 ohm impedance