E22-230T30D SX1262 lora module
[IC]：SX1262
[Frequency]：220.125~236.125MHz
[Power:]：30dBm
[Distance]： 10km
[size]：24*43mm
[Introduction]：E22-230T30D is a new generation of LoRa wireless module. It is a wireless serial port module (UART) based on SEMTECH's SX1262 radio frequency chip. Spread spectrum technology, TTL level output, compatible with 3.3V and 5V IO port voltage.
| Module | Interface | IC | Frequency（hz） | Power（dbm） | Distance（km） | Air speed（bps） | Package | Size（mm） | Feature | Manual | Sample |
|---|---|---|---|---|---|---|---|---|---|---|---|
| E22-230T37S | - | - | - | - | - | - | - | - | |||
| E22-900MM22S | SPI | SX1262 | 868M/915M | 22 | 6 | 0.018-62.5k | SMD | 10*10*2.5 | LoRa modulation technology, ultra-small size and low power consumption | ||
| E22-230T30D | UART | SX1262 | 230M | 30 | 10 | 0.3~15.6k | In-line | 24*43 | LoRa Auto Relay Remote Configuration | ||
| E22-230T22D | UART | SX1262 | 230M | twenty two | 5 | 0.3~15.6k | In-line | 21*36 | LoRa Auto Relay Remote Configuration | ||
| E22-900T22S | UART | SX1262 | 850.125MHz 930.125MHz | 22 | 5 | 0.3~62.5k | SMD | 16*26 | LoRa Automatic relay | ||
| E22-230T30S | UART | SX1262 | 230M | 30 | 10 | 0.3~15.6k | SMD | 40.5*25 | Low consumption, anti-interference | ||
| E22-230T22S | SX1262 | UART | 230M | 22 | 5 | 0.3k~62.5 | SMD | 16*26 | Low consumption, anti-interference | ||
| E22-900M30S | SPI | SX1262 | 868M 915M | 30 | 12 | 0.018~300k | SMD | 24*38.5 | Low consumption,anti-interference | ||
| E22-900M22S | SPI | SX1262 | 868M 915M | 22 | 7 | 0.018~300k | SMD | 14*20*3 | Low consumption,anti-interference | ||
| E22-230T33S | UART | SX1262 | 230M | 33 | 12 | 0.3~15.6k | SMD/stamp hole | 25*40.5 | LoRa/automatic relay/remote configuration/wake-up over the air |