E18-MS1PA2-PCB PA LNA low cost zigbee wireless module AD HOC net zigbee relay module for wireless remote control
[IC]：CC2530
[Frequency]：2.4~2.48GHz
[Power]：20dBm
[Distance]：800m
[Size]：16*27.0mm
[Weight]：1.8±0.1g
[Introduction]：E18-MS1PA2-PCB is small-sized 2.4GHz ZigBee wireless module, which is designed and produced by Chengdu Ebyte. SMD type with pcb antenna, with a transmission power of 100mW and the pin pitch is 1.27mm. It is applicable for various applications (especially smart home).
| Main Parameters | Value | Remarks | ||
| Min. | Typical | Max | ||
| Operating voltage（V） | 2.0 | 3.3 | 3.6 | ≥3.3 V ensures output power |
| Communication level（V） | - | 3.3 | - | For 5V TTL, it may be at risk of burning down |
| Operating temperature（℃） | -40 | - | 85 | Industrial design |
| Operating frequency（MHz） | 2.400 | - | 2.480 | ISM band |
| TX Current(mA) | - | 98 | - | Instant power consumption |
| RX current（mA） | - | 36 | - | - |
| Sleep current（μA） | - | 2 | - | Shut down by software |
| Max Tx power（dBm） | 19.6 | 20 | 20.5 | - |
| Receiving sensitivity（dBm） | -99 | -98 | -97 | Air data rate is 250 kbps |
| Main parameter | Description | Remarks |
| Reference distance | 800m | Test condition: clear and open area, antennna gain: 5dBi,antenna height: 2.5m, aur data rate: 250kbps |
| Protocol | ZigBee | - |
| Communication interface | I/O | All IO ports lead out |
| Package | SMD | - |
| Interface | 1.27mm | - |
| IC | CC2530F256RHAT/QFN40 | Built-in PA+LNA |
| FLASH | 256KB | - |
| RAM | 8KB | - |
| Core | 8051 | - |
| Size | 16*27mm | - |
| Antenna | PCB | 50 ohm impedance |