[IC]:nRF24LU1
[Frequency]:2.4GHz
[Power]:20dBm
[Distance]:1.0km
[Interface]:USB
[Introduction]:E11-MLU1PA is based on original imported RF chip nRF24LU1 form Nordic in Norway. With USB interface,lead-free process, power amplifier chip imported from American, embedded 51 MCU.E11-MLU1 is suitable for all kinds of USB development,can be compatible with E01(nRF24L01+) and E05(nRF24LE1).
Tips: This product has been removed from shelves, and mass production can be initiated.
No. | Parameter item | Value | Remark |
1 | RF IC | nRF24LU1 | Nordic |
2 | Size | 15 * 53.3 mm | - |
3 | Weight | 3.3g | Average weight |
4 | Frequency Band | 2.4~2.525GHz | Adjustable viasoftware (16MHz oscillator) |
5 | PCB | SMT, lead-free | - |
6 | Connector | USB | Plug-in(PCcompatible) |
7 | Supply voltage | 4.0 ~ 5.25V DC | 5V (recommended) |
8 | Communication level | 0.7 ~ 3.5V DC | VCC refers to the supply voltage |
9 | Operation Range | 1000m | Test condition: Clearand open area, 20dBm,antennagain: 5dBi,height: 2m, Air daterate: 250kbps |
10 | Transmitting power | 20dBm | About 100mW |
11 | Air data rate | 250kbps ~ 2Mbps | 250kbps, 1Mbps, 2Mbps |
12 | Sleep current | 500uA | MCU in sleep, VCC=5V |
13 | Transmitting current | 95mA@20dBm | ≥200mA (recommended) |
14 | Receiving current | 22mA@5V | Powered by USB |
15 | Communication interface | USB | All IO led out,please refer to IC datasheet |
16 | Transmitting length | 1~32 bytes | For one package, 3 level FIFO |
17 | Transmitting length | 1~32 bytes | For one package, 3 level FIFO |
18 | Receiving length | PCB | 50Ω characteristic impedance |
19 | Operating temperature | -40 ~ +85℃ | - |
20 | Operating humidity | 10% ~ 90% | Relative humidity, nocondensation |
21 | Storage temperature | -40 ~ +125℃ | - |
22 | Sensitivity | -106dBm@250kbps | - |