Home >Module>4G/NB/GPRS/GNSS/CAN>GNSS
E108-GN03G-TTL GNSS multi-mode satellite positioning and navigation module BDS/GPS/GLONASS

[Chip solution]:AT6558R

[Communication interface]:RS232

[Operating voltage]: 2.7-5.5V

[Positioning system:]:BDS/GPS/GLONASS

[Product size]: 50.4*38.4*17.0mm

[Introduction]:E108-GN03G-TTL is a high-performance, highly integrated, low-power, low-cost multi-mode satellite positioning and navigation module.The shell adopts three-proof coating, which is Anti-Fungal, Anti-Humidity, and Anti-Salt Spray. Based on the AT6558R solution, it can be used for GNSS positioning and navigation applications such as vehicle navigation, smart wearables, and drones. It supports BDS/GPS/GLONASS, is small in size, low in power consumption, and provides software and hardware interfaces compatible with other module manufacturers, greatly reducing the user's development cycle. It also supports multiple ways to connect to other peripherals, supports UART and GPIO interfaces, and can be customized if I2C and SPI interfaces are required.

Main parameters performance Remark
minimum value Typical value maximum value
Working voltage (V) 2.7 5.0 5.6 Exceeding 5.5V may burn the module
Communication level (V)
3.3
Using 5V TTL risks burning out
Working temperature (℃) -40 - 85 Industrial grade design
humidity 5% - -95%RH No condensation
Main parameters describe Remark
Baud rate (bps) 4800~115200 Default 9600
data bits 8bit -
Stop bit 1 -
Communication interface UART -
Product size 50.2*38.4*17.0mm ±0.2mm
Antenna interface ceramic antenna -
Communication protocol Support NMEA0183 V4.10 and previous versions -
Location update rate 1Hz The maximum positioning update frequency can reach 10Hz
Supported positioning systems BDS/GPS/GLONASS BDS B1、GPS L1、GLONASS L1
Product weight 65.2g ±0.5
category Indicator items Typical value unit
Positioning time (test condition 1) cold start ≤32 s
hot start ≤1 s
recapture ≤1 s
Sensitivity (test condition 2) cold start -148 dBm
hot start -156 dBm
recapture -160 dBm
track -162 dBm
Accuracy (test condition 3) Horizontal positioning accuracy <2.5 m
Speed positioning accuracy <0.1 m/s
Timing accuracy 30 ns
Power consumption (test condition 4) E108-GN03 capture current 25 mA
E108-GN03S capture current 26
E108-GN03D capture  current
24
E108-GN03G-TTL capture current
25
E108-GN03G-485 capture current
29
E108-GN03G-232 capture current
30
E108-GN03 tracking current 25 mA
E108-GN03S tracking current 26
E108-GN03D tracking current
24
E108-GN03G-TTL tracking current
25
E108-GN03G-485 tracking current
29
E108-GN03G-232 tracking current
30
E108-GN03 sleep current 64 uA
E108-GN03S sleep current 57
E108-GN03D sleep current 0.3

Note: The above results are for GPS/Beidou dual-mode working mode.

[Test condition 1]: The number of receiving satellites is greater than 6, the signal strength of all satellites is -130dBm, the average value is taken after 10 tests, and the positioning error is less than 10 meters.

[Test condition 2]: External LNA noise coefficient is 0.8, the number of receiving satellites is greater than 6, and the received signal strength value is locked within five minutes or without losing lock.

[Test Condition 3]: Open and unobstructed environment, 24 hours of continuous power-on test, 50% CEP.

[Test Condition 4]: The number of receiving satellites is greater than 6, and the signal strength of all satellites is -130dBm.