[Communication interface]:UART
[Operating voltage]:2.7-3.6V
[Positioning system]:BDS
[Product size]:12.2*16.0*2.4mm
[Introduction]:The E108-GN03B single Beidou positioning and navigation module is a high-performance positioning and navigation module based on the sixth-generation SOC single Beidou chip AT6668B of Zhongkewei. It applies the new navigation integrated SOC single chip technology, which can meet the application of high-precision positioning and high-precision timing. It has the characteristics of high integration, high performance, low power consumption, and small size. It also supports Beidou-2 (B1I) and Beidou-3 (B1C) signals. This series of modules has three common packages and is compatible with the software and hardware interfaces of GNSS modules of other manufacturers. It can be used in vehicle navigation, wearable devices, mobile phones, IoT devices, drones and other application fields.
Pin number | Pin Name | Pin Direction | Pin Purpose |
1 | NC | - | - |
2 | MODEL_SET | enter | Satellite system mode selection, high level or floating for BDS + GPS, low level for GPS + GLONASS |
3 | 1PPS | Output | 1 Pulse Per Second |
4 | ON_OFF | enter | Sleep control, keep high level (internal pull-up) for normal operation, enter sleep mode at low level |
5 | NC | - | - |
6 | NC | - | - |
7 | NC | - | - |
8 | RESET_N | enter | Reset pin, external reset input, internal pull-up, must be left floating if not used |
9 | VCC_RF | Output | RF power output, used to power the active antenna (output power voltage equals VCC) |
10 | GND | - | Module Ground |
11 | RF_IN | enter | Antenna interface |
12 | GND | - | Module Ground |
13 | GND | - | Module Ground |
14 | ANT_ON | Output | Active antenna power supply control, for external active antenna switch control |
15 | NC | - | - |
16 | NC | - | - |
17 | NC | - | - |
18 | NC | - | - |
19 | NC | - | - |
20 | TXD | Output | Serial port output, 3.3V level |
21 | RXD | enter | Serial port input, 3.3V level |
22 | V_BCKP | Input/Output | RTC power supply, can charge external battery, internal series 100Ω resistor |
23 | VCC | enter | Power supply pin, power supply range: 2.7V-3.6V |
24 | GND | - | Module Ground |