E108-GN02D Mini Pet Tracker GPS/GNSS Module GNSS Car Navigation Satellite Positioning Wireless Transceiver Module Pet Location Tracking
[Protocol]：Support NMEA0183 V4.1 and previous versions, the maximum fixed update frequency can reach 10Hz
[Certification]：Pending
[Package]：6P wiring seat, spacing 1.0mm
[Product weight]：5.5±0.1g
[Introduction]：E108-GN02D is a low-power, low-cost multi-mode satellite positioning and navigation module.It is small in size and low in power consumption.It can be used for GNSS positioning such as car navigation, smart wear,and drone flight control
Official Store| Modem | Interface Signal | Transmission Method | Network protocol | Working voltage(V) | Installation | Sizemm | Feature | Manual | Sample |
|---|---|---|---|---|---|---|---|---|---|
| EWD108-GN05(TTL) | UART | GNSS positioning | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | GNSS module for BDS/GPS/GLONASS/GALILEO/QZSS/SBAS positioning system | ||
| EWD108-GN05(485) | RS485 | GNSS positioning | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | GNSS module for BDS/GPS/GLONASS/GALILEO/QZSS/SBAS positioning system | ||
| EWD108-GN05(232) | RS232 RS485 | GNSS positioning | TCP/UDP, MQTT, HTTP | DC 5～36 | Positioning hole | 84*82*25 | European version high performance 4G DTU | ||
| EWD108-GN04(TTL) | UART | GNSS positioning | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | GNSS module for BDS/GPS/GLONASS/GALILEO positioning system | ||
| EWD108-GN04(485) | RS485 | GNSS positioning | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | GNSS module for BDS/GPS/GLONASS/GALILEO positioning system | ||
| EWD108-GN04(232) | RS232 | GNSS positioning | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | GNSS module for BDS/GPS/GLONASS/GALILEO positioning system | ||
| EWD108-GN03(TTL) | UART | GNSS positioning | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | GNSS module for BDS/GPS/GLONASS positioning system | ||
| EWD108-GN03(485) | RS485 | GNSS positioning | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | GNSS positioning module for BDS/GPS/GLONASS positioning system | ||
| EWD108-GN03(232) | RS485 | GNSS positioning | Modbus RTU | DC 5~24 | Guide rail + positioning hole | 103*28*28.5 | GNSS module for BDS/GPS/GLONASS positioning system | ||
| E108-GN02S | UART GPIO | GNSS positioning | NMEA0183 V4.1 and previous versions | DC 2.8-4.2 | Half hole（SMT） | 16*12*2.4 | Low power consumption, multi-mode satellite positioning module | ||
| E108-D01 | RS485 | GNSS positioning | Modbus RTU | DC 5~36V | Guide rail type | 96.5*50*31.4 | Multi-mode GNSS positioning module can be combined arbitrarily | ||
| E108-GN02 | UART GPIO | GNSS positioning | NMEA0183 V4.1 and previous versions | DC 2.8-4.2 | Half hole (SMT surface mount) | 10.1*9.7*2.4 | Low power consumption, multi-mode satellite positioning module | ||
| E108-GN02D | UART GPIO | GNSS positioning | NMEA0183 V4.1 and previous versions | DC 3-5.5 | 6P wiring seat, spacing 1.0mm | 22*20*5.8 | Low power consumption, multi-mode satellite positioning module |