E108-GN02 GPS Satellite Positioning Navigation Module I2C GPIO GPS Wireless Module for Car Navigation Smart Wear Drone UAV
[Protocol]：Support NMEA0183 v4.1 and earlier versions, the maximum fixed update frequency can reach 10Hz
[Certification]：Pending
[Package]：Half hole (SMT surface mount)
[Product weight]：0.5±0.1g
[Introduction]：E108-GN02 is a multi-mode satellite positioning and navigation module with high performance, high integration, low power consumption and low cost, which can be used in GNSS positioning applications such as vehicle navigation, intelligent wear, UAV, etc.
| No. | Name | Function |
|---|---|---|
| 1 | GND | Ground |
| 2 | TXD | UART output (2.8V) |
| 3 | RXD | UART input (2.8V) |
| 4 | 1PPS | Second pulse output, users can set frequency, duration, etc. through commands |
| 5 | FORCE_ON | Sleep wake-up pin, pulled up when the module enters ultra-low power consumptionThe pin exits the ultra-low power consumption mode (the pin level is 1.1V, ifthe control pin level is not 1.1V, voltage splitting is required) |
| 6 | VBKP | RTC power input, RTC power must be supplied for the module to work normally (2v-4.2v) |
| 7 | NC | Reserved |
| 8 | VCC | Module power supply (2.8v-4.2v) |
| 9 | RSTN | Reset foot, default is pull up, reset when pull down |
| 10 | GND | Ground |
| 11 | RF_IN | RF input |
| 12 | GND | Ground |
| 13 | ANTON | External LNA or active antenna power control pin, 2.8V level |
| 14 | VCC_RF | RF power output, to supply power to the external active antenna (thisVCC_RF output voltage is equal to VCC) |
| 15~18 | NC | Reserved |