[Product weight]:7.77g±1g
[IC]:SX1302
[Frequency]:865~872MHz
[Power]:27dBm
[Distance]:5km
[Feature]:LoRa Gateway Module
[Introduction]:E106-868G27P2 module is a LoRa gateway RF module designed based on the SX1302 chip. It adopts the standard Mini PCI-e package,SPI interface,the module has built-in PA and LNA,and the half-duplex design is convenient for users to quickly develop LoRa gateway equipment.
No. | Mini PCIe pin | E106-xxxG27P2 pin | I/O | Function | Notes |
1 | WAKEM | RESERVED | DO | Used by transparent transmission version, floating | |
2 | 3.3Vaux | VCC_3V3 | PI | 3.3V DC main power input | |
3 | COEX1 | NC | —— | For internal use, keep floating | |
4 | GND | GND | —— | Ground | |
5 | COEX2 | NC | —— | For internal use, keep floating | |
6 | 1.5V | NC | —— | Unused | |
7 | CLKREQ# | NC | —— | For internal use, keep floating | |
8 | UIM_PWR | NC | —— | Unused | |
9 | GND | GND | —— | Ground | |
10 | UIM_DATA | RESERVED | IO | Used by transparent transmission version, floating | |
11 | REFCLK- | RESERVED | DI | Used by transparent transmission version, floating | |
12 | UIM_CLK | RESERVED | IO | Used by transparent transmission version, floating | |
13 | REFCLK+ | RESERVED | DO | Used by transparent transmission version, floating | |
14 | UIM_RESET | NC | —— | Unused | |
15 | GND | GND | —— | Ground | |
16 | UIM_VPP | NC | —— | For internal use, keep floating | |
17 | RESERVED | NC | —— | For internal use, keep floating | |
18 | GND | GND | —— | Ground | |
19 | RESERVED | PPS | DI | GPS timing input | Can be floated |
20 | W_DISABLE# | NC | —— | For internal use, keep floating | |
21 | GND | GND | —— | Ground | |
22 | PERST# | NRESET | DI | Reset control pin | High level reset |
23 | PERn0 | RESERVED | DI | Reserved: external floating | |
24 | 3.3 Vaux | VCC_3V3 | PI | 33V DC main power input | |
25 | PERp0 | NC | —— | Unused | |
26 | GND | GND | —— | Ground | |
27 | GND | GND | —— | Ground | |
28 | L5V | NC | —— | Unused | |
29 | GND | GND | —— | Ground | |
30 | SNIB_CLK | NC | —— | For internal use, keep floating | |
31 | PETn0 | RESERVED | DO | Reserved: external floating | |
32 | SMB—DATA | NC | —— | For internal use, keep floating | |
33 | PETp0 | NC | —— | Unused | |
34 | GND | GND | —— | Ground | |
35 | GND | GND | —— | Ground | |
36 | USB_D+ | RESERVED | IO | Used by transparent transmission version, floating | |
37 | GND | GND | —— | Ground | |
38 | USB_D+ | RESERVED | IO | Used by transparent transmission version, floating | |
39 | 3 3 Vaux | VCC_3V3 | PI | 3.3V DC main power input | |
40 | GND | GND | —— | Ground | |
41 | 3.3 Vaux | VCC_3V3 | PI | 3.3V DC main power input | |
42 | LED_WWAN# | RX_ON | DO | connected to the GPIO3 of SX1302. | |
43 | GND | GND | —— | Ground | |
44 | LED—WLAN# | TX_ON | DO | connected to the GPIO3 of SX1302. | |
45 | RESERVED | SX_SCK | DI | SPI clock signal input | |
46 | LED—WPAN# | CFG_ON | DO | CFG indication, connected to onboard LED | |
47 | RESERVED | SX_NflSO | DO | SPI data output | |
48 | L5V | NC | —— | Unused | |
49 | RESERVED | SX_MOSI | DI | SPI data input | |
50 | GND | GND | —— | Ground | |
51 | RESERVED | SX_CSN | DI | SPI chip select signal input | |
52 | 3.3Vaux | VCC_3V3 | PI | 3.3V DC main power input |