LoRa chip SX1302 PA LNA LoRa LoRaWAN gateway module RF with mini PCI-e interface
[IC]：SX1302
[Frequency]：470~510MHz
[Power]：27dBm
[Communication Interface]：PCI-e
[Introduction]：E106-470G27P2 module is a LoRa gateway RF module designed based on the SX1302 chip. It adopts the standard Mini PCI-e package, SPI interface, the module has built-in PA and LNA, and the half-duplex design is convenient for users to quickly develop LoRa gateway equipment.
| No. | Mini PCIe definition | M-GW1302S definition | I/O attribute | Function description |
|---|---|---|---|---|
| 1 | WAKE# | RESERVED | DO | Use in transparent version, suspended |
| 2 | 3.3Vaux | VCC_3V3 | PI | 3.3V DC Main power input |
| 3 | COEX1 | NC | — | Internal use, suspended |
| 4 | GND | GND | — | Ground |
| 5 | COEX2 | NC | — | Internal use, suspended |
| 6 | 1.5V | NC | — | Not used |
| 7 | CLKREQ# | NC | — | Internal use, suspended |
| 8 | UIM_PWR | NC | — | Not used |
| 9 | GND | GND | — | Ground |
| 10 | UIM_DATA | RESERVED | IO | Use in transparent version, suspended |
| 11 | REFCLK- | RESERVED | DI | Use in transparent version, suspended |
| 12 | UIM_CLK | RESERVED | IO | Use in transparent version, suspended |
| 13 | REFCLK+ | RESERVED | DO | Use in transparent version, suspended |
| 14 | UIM_RESET | NC | — | Not used |
| 15 | GND | GND | — | Ground |
| 16 | UIM_VPP | NC | — | Internal use, suspended |
| 17 | RESERVED | NC | — | Internal use, suspended |
| 18 | GND | GND | — | Ground |
| 19 | RESERVED | PPS | DI | GPS time input, can be suspended |
| 20 | W_DISABLE# | NC | — | Internal use, suspended |
| 21 | GND | GND | — | Ground |
| 22 | PERST# | NRESET | DI | Reset control pin, valid in high level |
| 23 | PERn0 | RESERVED | DI | Reserved, externally suspended |
| 24 | 3.3Vaux | VCC_3V3 | PI | 3.3V DC Main power input |
| 25 | PERp0 | NC | — | Not used |
| 26 | GND | GND | — | Ground |
| 27 | GND | GND | — | Ground |
| 28 | 1.5V | NC | — | Not used |
| 29 | GND | GND | — | Ground |
| 30 | SMB_CLK | NC | — | Internal use, suspended |
| 31 | PETn0 | RESERVED | DO | Reserved, externally suspended |
| 32 | SMB_DATA | NC | — | Internal use, suspended |
| 33 | PETp0 | NC | — | Not used |
| 34 | GND | GND | — | Ground |
| 35 | GND | GND | — | Ground |
| 36 | USB_D- | RESERVED | IO | Use in transparent version, suspended |
| 37 | GND | GND | — | Ground |
| 38 | USB_D+ | RESERVED | IO | Use in transparent version, suspended |
| 39 | 3.3Vaux | VCC_3V3 | PI | 3.3V DC Main power input |
| 40 | GND | GND | — | Ground |
| 41 | 3.3Vaux | VCC_3V3 | PI | 3.3V DC Main power input |
| 42 | LED_WWAN# | RX_ON | DO | RX indication, connect to onboard LED |
| 43 | GND | GND | — | Ground |
| 44 | LED_WLAN# | TX_ON | DO | TX indication, connect to onboard LE |
| 45 | RESERVED | SX_SCK | DI | SPI clock signal input |
| 46 | LED_WPAN# | CFG_ON | DO | CFG indication, connect to onboard LE |
| 47 | RESERVED | SX_MISO | DO | SPI data output |
| 48 | 1.5V NC | — | Not used | |
| 49 | RESERVED | SX_MOSI | DI | SPI data intput |
| 50 | GND GND | — | Ground | |
| 51 | RESERVED | SX_CSN | DI | SPI chip select signal input |
| 52 | 3.3Vaux | VCC_3V3 | PI | 3.3V DC Main power input |