E104-BT5032U Ebyte OEM ODM ble 4.2 5.0 nRF52832 USB interface BLE wireless packet capture tool
[Chip]：nRF52832
[Frequency]：2400~2480MHz
[Type]：Bluetooth 4.2/5.0
[Distance]：80m
[Product weight]：8.7g±0.1g
[Size]：59*18mm
[Introduction]：E104-BT5032U is a small USB interface ble wireless packet capture tool produced by Ebyte, with a high-performance PCB on-board antenna and BLE low energy (ble) SOC scheme,adopts Nordic's original imported nRF52832 RF chip, which supports BLE 4.2 and ble 5.0; the chip comes,with a high-performance ARM CORTEX-M4 core, using 32M+32.768kHz industrial grade crystal oscillator, and has AART, I2C,SPI, ADC, DMA, PWM and other rich peripheral resources.
Official Store
| Serial number | Pin | Pin Orientation | Remark |
|---|---|---|---|
| 1 | GND | —— | Power reference ground |
| 2 | P0.10 | J24 | For details, please refer to the official chip manual |
| 3 | P0.09 | L24 | For details, please refer to the official chip manual |
| 4 | P1.04 | U24 | For details, please refer to the official chip manual |
| 5 | P1.02 | W24 | For details, please refer to the official chip manual |
| 6 | P1.00 | AD22 | For details, please refer to the official chip manual |
| 7 | P1.07 | P23 | For details, please refer to the official chip manual |
| 8 | P1.01 | Y23 | For details, please refer to the official chip manual |
| 9 | P0.24 | AD20 | For details, please refer to the official chip manual |
| 10 | P0.22 | AD18 | For details, please refer to the official chip manual |
| 11 | P0.20 | AD16 | For details, please refer to the official chip manual |
| 12 | P0.17 | AD12 | For details, please refer to the official chip manual |
| 13 | P0.15 | AD10 | For details, please refer to the official chip manual |
| 14 | P0.13 | AD8 | For details, please refer to the official chip manual |
| 15 | P0.14 | AC9 | For details, please refer to the official chip manual |
| 16 | VBUS | USB5V | Simultaneous power supply with USB is prohibited, maximum 5.5V |
| 17 | VDD | —— | chip power supply pin, the maximum is 3.6V, it is forbidden to supply power with the USB power supply at the same time |
| 18 | GND | —— | Power reference ground |
| 19 | P0.04 | J1 | For details, please refer to the official chip manual |
| 20 | P0.26 | G1 | For details, please refer to the official chip manual |
| 21 | P0.11 | B19 | For details, please refer to the official chip manual |
| 22 | P0.31 | A8 | For details, please refer to the official chip manual |
| 23 | P0.29 | A10 | For details, please refer to the official chip manual |
| 24 | P0.02 | A12 | For details, please refer to the official chip manual |
| 25 | P1.15 | A14 | For details, please refer to the official chip manual |
| 26 | P1.13 | A16 | For details, please refer to the official chip manual |
| 27 | P1.11 | B19 | For details, please refer to the official chip manual |
| 28 | P1.10 | A20 | For details, please refer to the official chip manual |
| 29 | GND | —— | Power reference ground |
| 30 | GND | —— | Power reference ground |
| 31 | V | VDD | Download interface, try to avoid the simultaneous power supply of VDD under USB power supply |
| 32 | R | RESET | Download interface, try to avoid the simultaneous power supply of VDD under USB power supply |
| 33 | D | SWDIO | Download interface, try to avoid the simultaneous power supply of VDD under USB power supply |
| 34 | C | SWCLK | Download interface, try to avoid the simultaneous power supply of VDD under USB power supply |
| 35 | G | GND | Download interface, try to avoid the simultaneous power supply of VDD under USB power supply |
| 36 | RST | RESET | Reset button |
| 37 | SW | P1.06 | Function keys |
| 38 | LED1 | RGB Tri-color LED | R(Red): P0.08; G(Green): P1.09; B(Blue): P0.12 |
| 39 | LED | LED | P0.06 |
| 40 | G | GND | USB Test Point |
| 41 | D+ | —— | USB test point |
| 42 | D- | —— | USB Test Point |
| 43 | V | VBUS | USB Test Point |