Home >Module>BLE>EFR32**

E104-BT11G-IPX Bluetooth mesh ad hoc network sig mesh V1.0 standard

[Frequency]:2400~2483.5MHz

[Modulation]:GSFK

[Range]:300m(IPX antenna)

[Size]:16*13mm(IPX version)

[Weight]:0.8±0.1g(IPX version)

[Introduction]:The E104-BT11 Bluetooth mesh ad hoc network module supports the sig mesh V1.0 standard, and the single network theory can accommodate up to 10,922 node devices. The device automatically memorizes the network information after connecting to the network.

1
No. Function Description
1 GND Ground,connect to power reference ground
2 PWN N/A
3 PWN N/A
4 PA00 N/A
5 PA03 N/A
6 N.C -
7 N.C -
8 PA04 N/A
9 PA05 N/A
10 SWD -
11 SWC -
12 N.C -
13 NetLink Network indicator, pin outputs high level after successfully networking
14 PD04 N/A
15 PWM N/A
16 PD03 N/A
17 TXD TX pin of UART,for UART receiving
18 RXD RX pin of UART,for UART transmitting
19 VCC   Power supply 1.9~3.6V(It is recommended to add a ceramic filter capacitor externally)
20 GND Ground,connect to power reference ground
21 PC02 N/A
22 PC03 Low-power role selection pin (internal pull-up):Low power consumption role: pull up or float;Other roles: Go directly to the ground.
23 PC04 Reset. Except for hardware information (UART configuration), allfactory settings are restored.
24 Wakeup The wake-up pin is valid in low level under low power mode.
25 RST Chip reset trigger input pin, valid in low level
26 GND Ground,connect to power reference ground