Home >Module>WiFi>Other
E103-W14X Wi-Fi& Ble module Supports AP, STA, AP+STA BLE 5.2 protocol MQTT /MQTTS protocol

[Working voltage]:2.7-3.6V

[Communication protocol]:IEEE 802.11b/g/n + BLE5.2

[Transmitting power]:18dBm

[Communication distance]:500m

[Product size]:10*10mm

[Introduction]:E103-W14X is a low-power, cost-effective, IPEX antenna Wi-Fi + ble module developed by Ebyte, which complies with BLE5.2 and IEEE 802.11b/g/n standard protocol specifications. This WiFi module integrates the hardware and software resources required for complete Wi-Fi and BLE applications, supports AP, STA, AP+STA 3 Wi-Fi working modes and low-power BLE, and is very suitable for low-rate applications and data acquisition applications such as smart home and industrial control.

PIN
Pin numberPin namePin typePin usage
1GND-power ground
2NC-empty legs
3VBAT-VCC recommended 3.3v
4GPIO24I/OGPIO
5GND-power ground
6GND-power ground
7CEN-The chip enable pin is active at high level (the module has an internal pull-up, and customers can use this pin to implement the hardware reset pin function).
8ADC1IAnalog input pin (no software function yet)
9GPIO6I/OGPIO
10GPIO8I/OGPIO
11NC-empty legs
12GND-power ground
13GPIO9IDefault SLEEP wake-up pin (valid on rising edge or falling edge, related to customer's actual configuration)
14TXDTHEModule serial port sending
15RXDIModule serial port reception
16GPIO1I/OGPIO
17GPIO0I/OGPIO
18GND-GPIO