https://www.cdebyte.com/Aboutus-NewProductExpress 🍂Shop Now–25% OFF Ends Nov 30! BUYBUYShop
fx1fx2Share
English English
FRESCN
Home >Module>WiFi>EXCC3200
CC3200 chip
WiFi Module
small size
CC3200 chip
WiFi Module
small size

E103-W02 2.4G ultra-low power serial port to Wi-Fi module CC3220R chip patch CC3200IPV6 network protocol

[IC]：CC3200

[Frequency]：2.402~2.484GHz

[Power]：20dBm

[Distance]：300m

[Interface]：UART

[Weight]：2.1±0.1g

[Introduction]：E103-W02, based on CC3200 of TI, is an ultra low power UART to Wi-Fi module with small size SMT packing and PCB antenna operating at 2.4 ~ 2.484GHz. It supports AT command, standard IEEE802.11b/g/n protocol and complete TCP/IP protocol stack.

Send Inquiry
Purchase
File Downloads Compare
Pin Definition
Pin Name Type Function
1 GND - Power ground
2 GPIO26 Input/Output Universal IO port
3 GPIO27 Input/Output Universal IO port
4 RST Input Module reset pin, low reset
5 SOP2 Input Burn simulation mode selection
6 SOP1 Input Burn simulation mode selection
7 SOP0 Input Burn simulation mode selection
8 GND - Power ground
9 GND - Power ground
10 VCC - Equipment power supply VDC: 2.4V~3.6V (300mA or more)
11 GND - Power ground
12 GND - Power ground
13 GND - Power ground
14 GPIO31 Input/Output Universal IO port
15 GPIO0 Input/Output Universal IO port
16 GND - Power ground
17 GND - Power ground
18 GPIO30 Input/Output Universal IO port
19 GPIO1 Output UART output pin, support AT command
20 GPIO2 Input UART input pin, support AT command
21 GPIO3 Input/Output Universal IO port
22 GPIO4 Input/Output Universal IO port
23 GPIO5 Input/Output Universal IO port
24 GPIO6 Input/Output Universal IO port
25 GPIO7 Input/Output Universal IO port
26 GPIO8 Input/Output Universal IO port
27 GPIO9 Output WiFi connection status indicator, connected output is low, output is not connected
28 GND - Power ground
29 GND - Power ground
30 GPIO10 Output Network connection status indicator, connected output is low, output is not connected
31 GPIO11 Output Smartconfig status indicator, low when entering status, high when not entering status
32 GPIO12 Input Restore the factory setting pin and set it low when starting. After the status indicator flashes three times, the factory setting is restored.
33 GPIO13 Input/Output Universal IO port
34 GPIO14 Input/Output Universal IO port
35 GPIO15 Input/Output Universal IO port
36 GPIO16 Input/Output Universal IO port
37 GPIO17 Input/Output Universal IO port
38 GPIO22 Input/Output Universal IO port
39 GPIO28 Input/Output Universal IO port
40 TDI Input JTAG simulation foot
41 TDO Output JTAG simulation foot
42 TCK Input JTAG simulation foot
43 TMS Input/Output JTAG simulation foot
44 GND - Power ground