Home >Module>WiFi>ESP32
E101-C6MN4-XS Built-in ESP32-C6 chip solution Wi-Fi6 Low-power ble 5.3 protocol Dual-mode ble WiFi module

[Chip solution]:ESP32-C6

[Operating frequency]:2412~2484MHz

[Supported protocol]:IEEE 802.11ax

[Communication distance]:180m

[Interface type]:UART I/O

[Introduction]:E101-C6MN4-XS is a dual-mode ble WiFi module based on the built-in ESP32-C6 series chip solution. It supports Wi-Fi 6 and low-power ble 5.3 protocols. The WiFi module is small in size and integrates a variety of peripherals, including UART, I2C, I2S, infrared remote control module, temperature sensor, and analog/digital converter. It also has single-wire, dual-wire, and four-wire SPI interfaces. This dual-mode ble WiFi module can be used in smart home, industrial automation, healthcare, consumer electronics and other fields.

Absolute Maximum Ratings

Symbol Parameter Min. Max. Unit
VDD33Power pin voltage –0.33.6V
TSTOREStorage temperature–4085°C

Recommended working conditions

Symbol Parameter Min. Typical Max. Unit
VDD33Power pin voltage33.33.6V
IVDDExternal power supply current0.5A
TRecommended operating temperature–4085°C
HumidityHumidity85%RH
ITransmit current251400mA
Receive current78
Sleep current1438

RF characteristics

Module ModelESP32-C6-MINI-1ESP32-C6-MINI-1U
Working channel center frequency range2412~2484MHz2412~2484MHz
Wi-FiProtocol IEEE802.11b/g/nProtocol IEEE802.11b/g/n
Antenna Type  PCB Antenna IPEX Antenna
distanceWith Router@Mercury MW305R200m180m
Between modules200m180m