E101-C6MN4-PS-TB ESP32-C6 chip WiFi6+BLE 5.3 Dual-mode WiFi module development test version 2.4GH global license-free frequency band, MQTT protocol
[Interface]：USB
[Chip]：ESP32-C6
[Size]： 48.81*25.5mm
[Weight]： 6.55±0.1g
[Introduction]：E101-C6MN4-PS-TB is an entry-level development board that uses the ESP32-C6-MINI-1 dual-core ble WiFi module, which is named for its small size. This development board has complete Wi-Fi and low-power ble functions, and most of the pins of the module on the board have been led out to the pin headers on both sides. Developers can easily connect a variety of peripheral devices through jumpers according to actual needs, and the development board can also be plugged into a breadboard for use.
| Serial number | Pin name | Pin type | Pin purpose |
| 1 | 3V3 | P | 3.3 V power supply |
| 2 | RST | I | High level: chip enabled; low level: chip disabled. |
| 3 | 2 | I/O/T | GPIO2, LP_GPIO2, LP_UART_RTSN, ADC1_CH2,FSPIQ |
| 4 | 3 | I/O/T | GPIO3, LP_GPIO3, LP_UART_CTSN, ADC1_CH3 |
| 5 | 4 | I/O/T | MTMS, GPIO4, LP_GPIO4, LP_UART_RXD, ADC1_CH4,FSPIHD |
| 6 | 5 | I/O/T | MTDI, GPIO5, LP_GPIO5, LP_UART_TXD, ADC1_CH5,FSPIWP |
| 7 | O/N | I/O/T | GPIO0, XTAL_32K_P, LP_GPIO0, LP_UART_DTRN,ADC1_CH0 |
| 8 | 1/N | I/O/T | GPIO1, XTAL_32K_N, LP_GPIO1, LP_UART_DSRN,ADC1_CH1 |
| 9 | 8 | I/O/T | GPIO8 |
| 10 | 6 | I/O/T | MTCK, GPIO6, LP_GPIO6, LP_I2C_SDA, ADC1_CH6,FSPICLK |
| 11 | 7 | I/O/T | MTDO, GPIO7, LP_GPIO7, LP_I2C_SCL, FSPID |
| 12 | 14 | I/O/T | GPIO14 |
| 13 | G | G | Ground |
| 14 | 5V | P | 5V Power |
| 15 | G | G | Ground |
| 16 | G | G | Ground |
| 17 | TX | I/O/T | U0TXD, GPIO16, FSPICS0 |
| 18 | RX | I/O/T | U0RXD, GPIO17, FSPICS1 |
| 19 | 23 | I/O/T | GPIO23, SDIO_DATA3 |
| 20 | 22 | I/O/T | GPIO22, SDIO_DATA2 |
| 21 | 21 | I/O/T | GPIO21, SDIO_DATA1, FSPICS5 |
| 22 | 20 | I/O/T | GPIO20, SDIO_DATA0, FSPICS4 |
| 23 | 19 | I/O/T | GPIO19, SDIO_CLK, FSPICS3 |
| 24 | 18 | I/O/T | GPIO18, SDIO_CMD, FSPICS2 |
| 25 | 15 | I/O/T | GPIO15 |
| 26 | 9 | I/O/T | GPIO9 |
| 27 | G | G | Ground |
| 28 | 13 | I/O/T | GPIO13, USB_D+ |
| 29 | 12 | I/O/T | GPIO12, USB_D- |
| 30 | G | G | Ground |